[ESPCamaro]

I have a few things for sale. I'm sure I will forget something but I can always add it later.

1 custom built adjustable rear swaybar based off a 21mm rear bar. I've posted it before I will dig up the link later for more details otherwise look it up. I posted it as being heavy and today weighed it on a certified scale. 11.7lbs W/endlinks still attached.
$160 takes all plus shipping.

1) AllStar breather tank. 1 quart capacity. Has a cleanable, oiled guaze flter on top, and a NPT drain petcock on the bottom. Tapped for a 3/4" NPT inlet. BRAND NEW.
$40

1) Kirkey intermediate seat. I beleive it was the 18" size. With black CLOTH cover. BOTH are BRAND NEW. The seat does have four holes drilled in it on the bottom. 3/8"
$150

a set of 3/8" screw in rocker studs...Make offer.

1) underdrive crank pulley for an LT1. Crank pulley only, no alternator pulley included. $30


1) stock 19mm rear swaybar. Good for using with the Unbalanced Engineering swaybar adjuster kit.....Make offer.

1) set el-cheapo 1.6 ratio roller tip rockers. These are for a ford, but AFAIK will work the same for a chevy. BRAND NEW
$50

1) set stock rear springs make offer

1) set of 3rd gen rear bumpstops. Shorter than 4h gen stops but stiffer. $5
(IMG:http://www.frrax.com/rrforum/style_emoticons/default/biggrin.gif)

1) Shoenfeild race muffler. 3" in/out. Only about 8" long. Can't do much to reduce noise. BRAND NEW....$5



And I'm sure I can find more......

[Jabberwocky]

Real tempting, I should really hold off on buying stuff until I install what I have. Does that swaybar come with the brackets.

[ESPCamaro]

Swaybar comes with everything. Remove stock bar, and install this one.

[ESPCamaro]

I am still willing to take trades

I need a LS1 or 1LE aluminum driveshaft

Poly trasmissiom mount

Poly engine mounts.

Driveshaft safety loop.

Worn out Koni DA's for the rear. Needing a rebuild is fine.

Also looking for a MOMO steering wheel.

[ESPCamaro]

Andy if you want the bar we could work out some sort of trade....I would like to get the REAR shocks that you have...

If interested make me some sort of offer. In the mean time I'm going to track down some revalve/build/resevoirs info for the rear Bills

[Jabberwocky]

For the time being, I think I am just going to leave my car as is. After the last round of mods, the car feels nimbler, but it will take some time for me to catch up to the car. I'm still driving at a slower pace than I should.

If the reason you need my shocks is to have your car up and running while you send your shocks off to be rebuilt. I have a pair of decarbons you can have. They aren't great, but they will get you to work.

[ESPCamaro]

I was going to have the rear shocks taken apart and converted to take-apart bilstein.

Possibly have remote resevoirs added to make them compression adjustable.

Then work W/Jason@Unbalanced Engineering on a shock valving that will get me close, when using his rear PHR brackets. Then buy a few shim stack sets and start re-valving my own shocks. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/thumbup.gif)

[ESPCamaro]

Need to sell this stuff to fund other purchases...

Price reduced to
125 for Kirkey seat W/cover

$110 for the adjustable bar

I found the Alternator pulley that is a match for the U/D crank pulley.

Or if you want I will sell everything except the breather tank for $250 plus shipping. Studs, rockers, U/D pulleys, seat sway bar, and muffler. And if you want a stock bar and stock springs fine, if not I'll throw those items away.....



READY TO SELL NOW.

[shortbus]

check your mail.