 So I was over at LS1 tech earlier.......... |
|
|||||||||
 Nov 28 2005, 12:59 PM
Post
#1
|
|
|
Advanced Member  Group: Advanced Members Posts: 854 Joined: 26-December 03 From: NYC, NY Member No.: 50  |
a couple of you may not want to revisit this
http://www.ls1tech.com/forums/showthread.php?t=409382 my brain really hurts sometimes reading this stuff. Especially in a handling and braking section. Yes, that thread is full of slotted rotors to release the gas from pads comments, and the classic QUOTE drive backwards and apply the brake and do that a few times and see if that helps I'm not knocking the site in general, it's helpful for many things, but still........ |
 |
 
|
 |
Replies
(1 - 43)
|
Nov 28 2005, 01:27 PM
Post
#2
|
|
|
Advanced Member Group: Advanced Members Posts: 410 Joined: 24-December 03 From: Kissimmee/Orlando, FL Member No.: 25 |
Think that's bad? Step into the "General Discussion" forum of any BMW board. Alot of people with nice cars, no common sense, and too much money...
All hail FRRAX.com (IMG:http://www.frrax.com/rrforum/style_emoticons/default/thumbup.gif) |
|
|
|
|
Nov 28 2005, 01:46 PM
Post
#3
|
|
|
Nothing says 'I love you.' like a box of Hydroshoks Group: Moderators Posts: 5,284 Joined: 23-December 03 From: Granbury, TX Member No.: 4 |
Thanks for the morning laugh ... I rarely post in that section any more ...
I do get a lot of PMs, though ... |
|
|
|
|
Nov 28 2005, 02:38 PM
Post
#4
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
QUOTE (mitchntx @ Nov 28 2005, 08:46) I rarely post in that section any more ... I do get a lot of PMs, though ... Same here (on both counts). Some days I still try (like that one). But most of the time, I just stay home (here at frrax). (IMG:http://www.frrax.com/rrforum/style_emoticons/default/wink.gif) |
|
|
|
|
Nov 28 2005, 03:21 PM
Post
#5
|
|
|
Seeking round tuits Group: Advanced Members Posts: 5,522 Joined: 24-December 03 From: Kentucky Member No.: 33 |
Breathe little brake pads, breathe ....
|
|
|
|
|
Nov 28 2005, 03:36 PM
Post
#6
|
|
|
I suck at the auto-x :( Group: Advanced Members Posts: 1,421 Joined: 21-April 05 From: TX Member No.: 727 |
Sooooo many idiots on LS1Tech.....
|
|
|
|
|
Nov 28 2005, 03:40 PM
Post
#7
|
|
|
Advanced Member Group: Advanced Members Posts: 588 Joined: 23-December 03 From: Sterling, IL Member No.: 7 |
I'd pretty well stopped going there too. Amazing how fast things have degenerated and how little has been learned depite the efforts from several frrax people in the past.
It gets uglier every year the fbody isn't replaced as the LS1's get more and more affordable to the teens and the plain moronic. The pool of intelligent, reasoned owners gets smaller every day. |
|
|
|
|
Nov 28 2005, 04:00 PM
Post
#8
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
QUOTE (Absolut Speed @ Nov 28 2005, 10:40) The pool of intelligent, reasoned owners gets smaller every day. Or they move here..... (IMG:http://www.frrax.com/rrforum/style_emoticons/default/wink.gif) |
|
|
|
|
Nov 28 2005, 05:32 PM
Post
#9
|
|
|
Member Group: Advanced Members Posts: 105 Joined: 23-September 04 Member No.: 465 |
That is the reason why I came over here (IMG:http://www.frrax.com/rrforum/style_emoticons/default/drink.gif) . You guys offer real knowledge without the sorting of junk.
-I remember driving backwards (to set the parking brake for old drum brakes (IMG:http://www.frrax.com/rrforum/style_emoticons/default/cool2.gif) ) -I remember telling my brother at Monster Mile not to just hold the brakes or they will fade (sure enough he came back telling me he held the brakes to the floor from 125mph until they faded away and that was what cause my warped rotors (IMG:http://www.frrax.com/rrforum/style_emoticons/default/banghead.gif) ) Anyone remember the chromed rotor thread (IMG:http://www.frrax.com/rrforum/style_emoticons/default/2thumbs.gif) . |
|
|
|
|
Nov 28 2005, 05:43 PM
Post
#10
|
|
|
Experienced Member Group: Advanced Members Posts: 2,290 Joined: 4-May 04 From: Kenvil, NJ Member No.: 331 |
QUOTE (77chevy @ Nov 28 2005, 12:32) Anyone remember the chromed rotor thread (IMG:http://www.frrax.com/rrforum/style_emoticons/default/2thumbs.gif) . (IMG:http://www.frrax.com/rrforum/style_emoticons/default/rotf.gif) That was a classic! |
|
|
|
|
Nov 28 2005, 05:46 PM
Post
#11
|
|
|
Veteran Member Group: Advanced Members Posts: 2,647 Joined: 23-December 03 From: Pittsburgh, PA Member No.: 14 |
This is the only site that I use for f-body tech.
|
|
|
|
|
Nov 28 2005, 06:05 PM
Post
#12
|
|
|
El Cucci Group: Advanced Members Posts: 291 Joined: 26-December 03 From: Queen Creek, AZ Member No.: 46 |
So Mitch.... Does drifting Make you faster through a corner? :leaving:
|
|
|
|
|
Nov 28 2005, 06:15 PM
Post
#13
|
|
|
Nothing says 'I love you.' like a box of Hydroshoks Group: Moderators Posts: 5,284 Joined: 23-December 03 From: Granbury, TX Member No.: 4 |
In the spirit of the season ... spreading good cheer and all, here are a few of my favorites ....
http://www.ls1tech.com/forums/showthread.php?t=353017 http://www.ls1tech.com/forums/showthread.php?t=292610 http://www.ls1tech.com/forums/showthread.php?t=262940 QUOTE (tom97ss @ Nov 28 2005, 12:05) So Mitch.... Does drifting Make you faster through a corner? :leaving: And if are REALLY bored, Tom is referring to this novel ... http://www.ls1tech.com/forums/showthread.php?t=382624 those "drifters" ... they crack me up, sometimes ... And the crazy thing about it is I know those guys ... used to autocross with them. The guy named McCall trying to sell his car in the classifieds section also knows them. They are really nice guys. I think they take their sport and/or the internet way too serious, though ... This post has been edited by mitchntx: Nov 28 2005, 06:16 PM |
|
|
|
|
Nov 28 2005, 06:34 PM
Post
#14
|
|
|
Advanced Member Group: Advanced Members Posts: 588 Joined: 23-December 03 From: Sterling, IL Member No.: 7 |
QUOTE (77chevy @ Nov 28 2005, 11:32) Anyone remember the chromed rotor thread (IMG:http://www.frrax.com/rrforum/style_emoticons/default/2thumbs.gif) . I feel honored that I've left a lasting mark on the online fbody community! (IMG:http://www.frrax.com/rrforum/style_emoticons/default/laugh.gif) |
|
|
|
|
Nov 28 2005, 07:21 PM
Post
#15
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
http://www.ls1tech.com/forums/showthread.p...10&page=1&pp=20
That's got to be one of the classics.... QUOTE A Corvette mechanic told me, that's why..... (IMG:http://www.frrax.com/rrforum/style_emoticons/default/nutkick.gif) |
|
|
|
|
Nov 28 2005, 07:24 PM
Post
#16
|
|
|
Senior Member Group: Advanced Members Posts: 5,226 Joined: 24-December 03 From: Danville, CA, USA Member No.: 27 |
....I use "Drilled" rotors..... (IMG:http://www.frrax.com/rrforum/style_emoticons/default/ph34r.gif)
....and they are PREEEEEEETY.... (IMG:http://www.frrax.com/rrforum/style_emoticons/default/rotf.gif) :leaving: |
|
|
|
|
Nov 28 2005, 07:40 PM
Post
#17
|
|
|
Advanced Member Group: Advanced Members Posts: 326 Joined: 10-July 04 From: Houston, Tx Member No.: 392 |
Sometimes I just want to hand out bans like lolly pops overthere just for the people who post stupid stuff thats already been covered.
|
|
|
|
|
Nov 28 2005, 07:46 PM
Post
#18
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
QUOTE (Stang Killer @ Nov 28 2005, 14:40) Sometimes I just want to hand out bans like lolly pops overthere just for the people who post stupid stuff thats already been covered. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/rotf.gif) (IMG:http://www.frrax.com/rrforum/style_emoticons/default/thumbup.gif) By the way, I saved the stuff from my website if you need any of it (since the links are dead). Drop me a line and I'll send you what you need. |
|
|
|
|
Nov 29 2005, 01:48 AM
Post
#19
|
|
|
Experienced Member Group: Advanced Members Posts: 1,766 Joined: 10-April 04 From: New Orleans, LA Member No.: 303 |
What, do you save them to break out during the holidays?
I used to have a file of some of my favorite stuff from the pre-crash LS1.com, circa 2003. Da's some funny sheeet!! |
|
|
|
|
Nov 29 2005, 02:35 AM
Post
#20
|
|
|
LS1 Inside! / Toolbox / Mechanical Engineer Group: Advanced Members Posts: 2,215 Joined: 5-February 04 From: NJ Member No.: 179 |
Those are all good ones! I still go to Tech mainly for engine related stuff....but you have so sift through so much garbage to find what you are looking for. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/mad.gif)
I like it here! |
|
|
|
|
Nov 29 2005, 03:48 AM
Post
#21
|
|
|
Chapter 11 Racing Group: Advanced Members Posts: 1,166 Joined: 15-February 04 From: Houston, Republic of Texas Member No.: 207 |
i don't waste my time on the corvette forums... (IMG:http://www.frrax.com/rrforum/style_emoticons/default/banghead.gif) (IMG:http://www.frrax.com/rrforum/style_emoticons/default/banghead.gif) (IMG:http://www.frrax.com/rrforum/style_emoticons/default/banghead.gif) (IMG:http://www.frrax.com/rrforum/style_emoticons/default/banghead.gif)
the one that really took the cake (i think on z06vette.com) was a slacker who posted a pic of his car at the dragstip... 30 posts later there was 1 post asking what he ran and 29 posts saying nice wax job - it's zaino. I lost several brain cells reading that thread that I will never go back (and all this time I was blaming the bottle of vodka I drank in Russia) |
|
|
|
|
Nov 29 2005, 04:50 AM
Post
#22
|
|
|
North of the border Group: Admin Posts: 2,307 Joined: 4-February 04 From: Montreal, CANADA Member No.: 177 |
So Mitch, tell us about the pissing on the rotors data... have any ? (IMG:http://www.frrax.com/rrforum/style_emoticons/default/rotf.gif)
|
|
|
|
|
Nov 29 2005, 05:09 AM
Post
#23
|
|
|
Advanced Member Group: Advanced Members Posts: 951 Joined: 2-January 04 From: Austin, TX Member No.: 88 |
QUOTE (35th_Anniversary_AS_Camaro_SS @ Nov 28 2005, 21:48) i don't waste my time on the corvette forums... I agree. Thats why I started along the f-body road long ago. Much more tech & knowledgable support... Its been down hill ever since (IMG:http://www.frrax.com/rrforum/style_emoticons/default/cool.gif) of those 'classics' my favorite quote (Mitch) QUOTE you go ahead and worship your demi-Gods ... I'll stick with Shumacher, Said, Gigliotti and Covini ...
This post has been edited by y5e06: Nov 29 2005, 05:09 AM |
|
|
|
|
Nov 29 2005, 01:00 PM
Post
#24
|
|
|
Experienced Member Group: Advanced Members Posts: 1,427 Joined: 12-February 04 From: Huntingtown, MD Member No.: 193 |
I never go into any other section, but the PCM reprogramming section on LS1 tech. There is still some crap to weed through, but it's not as bad. Plus there is some good info there (PCM section) for those who want to learn.
|
|
|
|
|
Nov 29 2005, 03:27 PM
Post
#25
|
|
|
Advanced Member Group: Advanced Members Posts: 452 Joined: 12-January 04 From: Charleston, SC Member No.: 121 |
QUOTE (pknowles @ Nov 29 2005, 07:00) I never go into any other section, but the PCM reprogramming section on LS1 tech. There is still some crap to weed through, but it's not as bad. Plus there is some good info there (PCM section) for those who want to learn. oh don't even start me on the moronisms spread on forums, and i'd say PCM section is one of the worse (although is getting better, due to consistant head bashing from few ppl that actually know what they're doing). These ppl will take so much completely on faith, but when i present them with math and physics and scientific experimentation they jump on my throat, simply because it goes against what's been admited as 'truth' before. it's a contest of who's more public/loud/obnoxious about their finds than who's methodology's cleaner. they really test my patience sometimes, as their complete lack of patience and knowledge of anything remotely scientific gets in a way of spreading what i consider (only after extensive validation by experimentation) to be correct. the only reason why i keep correcting and demonstrating my point time after time is to populate the forums enough that the 'signal to noise ratio' improves. keep on fighting the good fight, and one day maybe we won't have to explain why drilled rotors are not really worth it. yea, right (IMG:http://www.frrax.com/rrforum/style_emoticons/default/wink.gif) |
|
|
|
|
Nov 29 2005, 03:56 PM
Post
#26
|
|
|
Nothing says 'I love you.' like a box of Hydroshoks Group: Moderators Posts: 5,284 Joined: 23-December 03 From: Granbury, TX Member No.: 4 |
Morgan, that comment never made it to the right eyes ... :leaving:
|
|
|
|
|
Nov 29 2005, 05:06 PM
Post
#27
|
|
|
Veteran Member Group: Advanced Members Posts: 2,640 Joined: 25-December 03 From: Louisville, KY Member No.: 40 |
I read that forum a couple times, it was painful. CZ28.com is just as bad. There are some knowledgable folks, but the signal to noise ratio is terrible.
|
|
|
|
|
Nov 29 2005, 07:15 PM
Post
#28
|
|
|
Nitto Destroyer! Group: Advanced Members Posts: 248 Joined: 24-December 03 From: Rochester NY Member No.: 29 |
QUOTE (mitchntx @ Nov 28 2005, 12:15) In the spirit of the season ... spreading good cheer and all, here are a few of my favorites .... http://www.ls1tech.com/forums/showthread.php?t=353017 http://www.ls1tech.com/forums/showthread.php?t=292610 http://www.ls1tech.com/forums/showthread.php?t=262940 QUOTE (tom97ss @ Nov 28 2005, 12:05) So Mitch.... Does drifting Make you faster through a corner? :leaving: And if are REALLY bored, Tom is referring to this novel ... http://www.ls1tech.com/forums/showthread.php?t=382624 those "drifters" ... they crack me up, sometimes ... And the crazy thing about it is I know those guys ... used to autocross with them. The guy named McCall trying to sell his car in the classifieds section also knows them. They are really nice guys. I think they take their sport and/or the internet way too serious, though ... Hey Mitch..............THANKS!!!!!!! my special rotors did not come with "Pipe" cleaners.............man a about pissed my pants (IMG:http://www.frrax.com/rrforum/style_emoticons/default/beerchug.gif) Thanks, I have'nt laughed that hard in awhile (IMG:http://www.frrax.com/rrforum/style_emoticons/default/thumbup.gif) Pipe cleaners (IMG:http://www.frrax.com/rrforum/style_emoticons/default/drink.gif) Gary |
|
|
|
|
Nov 29 2005, 07:50 PM
Post
#29
|
|
|
Experienced Member Group: Advanced Members Posts: 1,957 Joined: 21-April 04 From: Utah Member No.: 317 |
LS1Tech has really went downhill. I remember when all the mindless fbody punks hung out at the SLP forum . . . then SLP pulled the plug on that forum and a lot of them took up residence at LS1Tech.
I think I'm finished trying to save people from the Strut Tower Brace trap. You get them staightened out one day, and a couple days later there is a thread with 30 testimonials of "I put a STB on my car and felt an immediate improvement, the car was totally changed!" (IMG:http://www.frrax.com/rrforum/style_emoticons/default/rolleyes.gif) |
|
|
|
|
Nov 29 2005, 10:36 PM
Post
#30
|
|
|
Advanced Member Group: Advanced Members Posts: 647 Joined: 30-December 03 From: Paris, Texas Member No.: 74 |
QUOTE (77chevy @ Nov 28 2005, 11:32) Anyone remember the chromed rotor thread (IMG:http://www.frrax.com/rrforum/style_emoticons/default/2thumbs.gif) . That was great.... I rarely every go to LS1tech. Usually only when I have an interesting link to follow. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/thumbup.gif) |
|
|
|
|
Nov 29 2005, 11:05 PM
Post
#31
|
|
|
Advanced Member Group: Advanced Members Posts: 647 Joined: 30-December 03 From: Paris, Texas Member No.: 74 |
[quote=GM01SS,Nov 29 2005, 13:15] [QUOTE=mitchntx,Nov 28 2005, 12:15]Hey Mitch..............THANKS!!!!!!! my special rotors did not come with "Pipe" cleaners.............man a about pissed my pants (IMG:http://www.frrax.com/rrforum/style_emoticons/default/beerchug.gif)
Thanks, I have'nt laughed that hard in awhile (IMG:http://www.frrax.com/rrforum/style_emoticons/default/thumbup.gif) Pipe cleaners (IMG:http://www.frrax.com/rrforum/style_emoticons/default/drink.gif) Gary [/quote] :stupid: That was pretty DARN funny Mitch. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/laugh.gif) |
|
|
|
|
Nov 30 2005, 12:55 AM
Post
#32
|
|
|
Advanced Member Group: Advanced Members Posts: 588 Joined: 23-December 03 From: Sterling, IL Member No.: 7 |
QUOTE (Cal @ Nov 29 2005, 13:50) LS1Tech has really went downhill. I remember when all the mindless fbody punks hung out at the SLP forum . . . then SLP pulled the plug on that forum and a lot of them took up residence at LS1Tech. The SLP people went to Chirpthird.com LS1tech's undoing is a combo of LS1.com's demise and younger kids and punks acquiring LS1's as the prices come down. You really want bad, LS2.com is your site. |
|
|
|
|
Nov 30 2005, 02:02 AM
Post
#33
|
|
|
Nothing says 'I love you.' like a box of Hydroshoks Group: Moderators Posts: 5,284 Joined: 23-December 03 From: Granbury, TX Member No.: 4 |
Can you imagine the pressure I am under to NOT post in thess threads!
http://www.ls1tech.com/forums/showthread.php?t=414378 http://www.ls1tech.com/forums/showthread.php?t=416101 This post has been edited by mitchntx: Nov 30 2005, 02:04 AM |
|
|
|
|
Nov 30 2005, 02:52 AM
Post
#34
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
QUOTE (mitchntx @ Nov 29 2005, 21:02) Can you imagine the pressure I am under to NOT post in thess threads! http://www.ls1tech.com/forums/showthread.php?t=414378 http://www.ls1tech.com/forums/showthread.php?t=416101 Yea, I decided to leave those alone as well. The first one has elves in his rotors....that explains the bumps. Or, maybe his rotors have a case of the mumps? The second one has me puzzled. Maybe he has the ratchet set backwards, or he's using a breaker bar and pulling it the wrong way..... |
|
|
|
|
Nov 30 2005, 02:57 AM
Post
#35
|
|
|
Nothing says 'I love you.' like a box of Hydroshoks Group: Moderators Posts: 5,284 Joined: 23-December 03 From: Granbury, TX Member No.: 4 |
QUOTE (trackbird @ Nov 29 2005, 20:52) The second one has me puzzled. Maybe he has the ratchet set backwards, or he's using a breaker bar and pulling it the wrong way..... On the caliper bolts? A breaker bar? use a torch? |
|
|
|
|
Nov 30 2005, 08:29 AM
Post
#36
|
|
|
Advanced Member Group: Advanced Members Posts: 326 Joined: 10-July 04 From: Houston, Tx Member No.: 392 |
QUOTE (trackbird @ Nov 28 2005, 13:46) QUOTE (Stang Killer @ Nov 28 2005, 14:40) Sometimes I just want to hand out bans like lolly pops overthere just for the people who post stupid stuff thats already been covered. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/rotf.gif) (IMG:http://www.frrax.com/rrforum/style_emoticons/default/thumbup.gif) By the way, I saved the stuff from my website if you need any of it (since the links are dead). Drop me a line and I'll send you what you need. Im not sure ill need it, people don't search anyway so its not gona do them any good. I do need the pics from the explanation of the 2 pc rotors that you did, but I think thats about it. When I tell them to search before they post, they think im being a dick about it (IMG:http://www.frrax.com/rrforum/style_emoticons/default/unsure.gif) I didnt cover warped rotors in any of the writeups, but its such a common problem that you would think people would catch on to it. |
|
|
|
|
Nov 30 2005, 08:32 AM
Post
#37
|
|
|
Advanced Member Group: Advanced Members Posts: 326 Joined: 10-July 04 From: Houston, Tx Member No.: 392 |
Now that I think about it, it makes me want to make a "before you post" thread.
|
|
|
|
|
Nov 30 2005, 01:19 PM
Post
#38
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
QUOTE (Stang Killer @ Nov 30 2005, 03:29) I do need the pics from the explanation of the 2 pc rotors that you did, but I think thats about it. I have them, just tell me where to send them (send me a PM). |
|
|
|
|
Nov 30 2005, 07:24 PM
Post
#39
|
|
|
Advanced Member Group: Advanced Members Posts: 854 Joined: 26-December 03 From: NYC, NY Member No.: 50 |
[quote=GM01SS,Nov 29 2005, 13:15] [QUOTE=mitchntx,Nov 28 2005, 12:15] In the spirit of the season ... spreading good cheer and all, here are a few of my favorites ....
http://www.ls1tech.com/forums/showthread.php?t=353017 http://www.ls1tech.com/forums/showthread.php?t=292610 http://www.ls1tech.com/forums/showthread.php?t=262940 [QUOTE=tom97ss,Nov 28 2005, 12:05] So Mitch.... Does drifting Make you faster through a corner? :leaving: [/QUOTE] And if are REALLY bored, Tom is referring to this novel ... http://www.ls1tech.com/forums/showthread.php?t=382624 [/quote] (IMG:http://www.frrax.com/rrforum/style_emoticons/default/rotf.gif) That is some of the most entertaining stuff I have ever read (I've read them a couple times now too). At the time though it's gets quite frustrating. The same expierence seems to be had on the majority of boards out there. Good to know I'm not the only one. |
|
|
|
|
Dec 4 2005, 07:57 PM
Post
#40
|
|
|
LS1 Inside! / Toolbox / Mechanical Engineer Group: Advanced Members Posts: 2,215 Joined: 5-February 04 From: NJ Member No.: 179 |
Some of those guys are real Aholes over there! They are giving me a hard time about trying to get 2k miles out of valvesprings for a cam. They don't read what you right and what your intentions are.
|
|
|
|
|
Dec 4 2005, 08:02 PM
Post
#41
|
|
|
Experienced Member Group: Advanced Members Posts: 1,957 Joined: 21-April 04 From: Utah Member No.: 317 |
QUOTE (Teutonic Speedracer @ Dec 4 2005, 13:57) Some of those guys are real Aholes over there! They are giving me a hard time about trying to get 2k miles out of valvesprings for a cam. They don't read what you right and what your intentions are. There's a lot of idiots on LS1Tech that aren't worth your time to try and help them. But the guys on Corner Carvers are just down right ruthless! |
|
|
|
|
Dec 4 2005, 08:11 PM
Post
#42
|
|
|
Advanced Member Group: Advanced Members Posts: 326 Joined: 10-July 04 From: Houston, Tx Member No.: 392 |
QUOTE (Cal @ Dec 4 2005, 14:02) QUOTE (Teutonic Speedracer @ Dec 4 2005, 13:57) Some of those guys are real Aholes over there! They are giving me a hard time about trying to get 2k miles out of valvesprings for a cam. They don't read what you right and what your intentions are. There's a lot of idiots on LS1Tech that aren't worth your time to try and help them. But the guys on Corner Carvers are just down right ruthless! I didnt even get approved for membership on corner carvers (IMG:http://www.frrax.com/rrforum/style_emoticons/default/unsure.gif) |
|
|
|
|
Dec 4 2005, 09:59 PM
Post
#43
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
QUOTE (Stang Killer @ Dec 4 2005, 15:11) I didnt even get approved for membership on corner carvers (IMG:http://www.frrax.com/rrforum/style_emoticons/default/unsure.gif) Did you use the name "Stang Killer"? The word "Stang" causes some violent reactions over there and that might have been the problem. |
|
|
|
|
Dec 5 2005, 12:12 AM
Post
#44
|
|
|
LS1 Inside! / Toolbox / Mechanical Engineer Group: Advanced Members Posts: 2,215 Joined: 5-February 04 From: NJ Member No.: 179 |
You can't register with certain e-mail domains either like yahoo or such. I had to use my old college account to register.
|
|
|
|
 |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 20th June 2025 - 01:34 AM |