![]() |
|
![]() |
![]()
Post
#1
|
|
Advanced Member ![]() ![]() Group: Advanced Members Posts: 997 Joined: 28-June 05 From: North Dallas, TX Member No.: 791 ![]() |
Hi all,
In the process of adding some safety stuff to the ORR car. I want to add a fuel pump cut off switch, where is the best place to tap the + line to add a toggle in the center part of the dash? Also, I was looking for a spot to mount the Actuator handle for the fire system and many of you recommended the A pillar area in previous threads so the Safety folks could access it through the window. I got to thinking if I have an 'event' that requires the fire system to be actuated, an armadillo or a rattlesnake are going to be the closest living beings to me. Chances are any course workers are going to be many, many minutes away. I think I will mount it in the center dash area as well so the navigator (if present) can get to it. |
|
|
![]() |
![]()
Post
#2
|
|
Engine and Tools Moderator ![]() ![]() ![]() Group: Advanced Members Posts: 1,859 Joined: 23-December 03 From: Lebanon TN Member No.: 6 ![]() |
I want to add a fuel pump cut off switch, where is the best place to tap the + line to add a toggle in the center part of the dash? In my ยด98 there was a gray wire running in a bundle from the relay box on the driver's side through the firewall, between the seat and the door, and behind the back seat to the pump. You could find the right pin on the connector under the dash (to get the right wire) and then extend a loop to the center and put a switch in it. |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 18th June 2025 - 10:31 PM |