[AndyJ]

Hi all,

In the process of adding some safety stuff to the ORR car.

I want to add a fuel pump cut off switch, where is the best place to tap the + line to add a toggle in the center part of the dash?


Also, I was looking for a spot to mount the Actuator handle for the fire system and many of you recommended the A pillar area in previous threads so the Safety folks could access it through the window. I got to thinking if I have an 'event' that requires the fire system to be actuated, an armadillo or a rattlesnake are going to be the closest living beings to me. Chances are any course workers are going to be many, many minutes away. I think I will mount it in the center dash area as well so the navigator (if present) can get to it.

[Blainefab]

Andy - I agree that for ORR with a navigator you want equal access by both drv and nav, so center mount for both cutoff and fire pull is good. If you wanted to cover all bases, get a fire system that will accomodate a second pull handle, and mount them on the A pillars so both drv/nav and outside help can get to them. For fuel cut you could wire 2 switches in series.

FP relay on LT1 cars is behind the drv side kick panel, by the dead pedal.