[trackbird]

It's in the garage and I took a few photos (in the garage). They aren't great, but you can get an idea of what kind of work I still have cut out for me.

Don't give me any crap about the picture sizes. I switched this machine to Windows Vista and my resizer won't work and I had to find another one. So, I'm stuck with what I've got right now.

It's a bit ugly, and plenty dusty, but it's "mine".

Attached File(s)

 188__Small_.JPG ( 43.01K ) Number of downloads: 81
 186__Small_.JPG ( 49.21K ) Number of downloads: 52
 187__Small_.JPG ( 43.34K ) Number of downloads: 39
 185__Small_.JPG ( 41.17K ) Number of downloads: 72
 184__Small_.JPG ( 65.92K ) Number of downloads: 53
 183__Small_.JPG ( 66.21K ) Number of downloads: 49
 182__Small_.JPG ( 66.55K ) Number of downloads: 45
 181__Small_.JPG ( 64.84K ) Number of downloads: 57
 189__Small_.JPG ( 42.38K ) Number of downloads: 57

 

[mitchntx]

At a local hardware store, I found a carbide drill bit that had a point on it and then cutters on the outer edge.

Not sure if it is technically is a spot weld cutter, but it certainly does a number on them.

Have to be careful not to go all the way through, though. cut a little, pry a little ...

[sgarnett]

At a local hardware store, I found a carbide drill bit that had a point on it and then cutters on the outer edge.

Not sure if it is technically is a spot weld cutter, but it certainly does a number on them.

I think you may be describing a bit designed for glass.