[rushman]

Doesn't matter what they look like, or what style, just round and good lip/bead.

PM or email at autocrosser@gmail.com

Thanks

[briandoll]

I have two sets of 16 x 8" gta rear wheels (these are 16mm offset). I used them on my A-sedan firebird but have since switched to a different wheel. You will need thin (1/8" or 3/16") spacers to use on the front to clear the LS1 caliper. I do not know if these will clear the front caliper on the earlier non-ls1 cars. I believe, but am not certain, that they will work fine with stock length wheel studs. Both sets I have have goodyear dot race tires on them from late '05/ early '06. Those tires are mostly used up, but not corded yet (but not competitive anymore; at least 7 heat cycles on each tire, and old. but maybe good for a few track days?) One of the fronts is corded on the outer edge due to a loose a-arm, causing a bad toe in condition.

These wheels are all straight, but the clearcoat is mostly gone. But they look fine at 20' and 20 mph. 4 of these were gold originally but have been resprayed black. The other 4 are original black. I also have a pair of 3/16" wheel spacers available.

With tire, I would like $75 each ($300/set). (again, tires are probably only good for a track day or two, not competitive)
For rims only, I'd like $50 each ($200/set).

If you are unfamiliar, see this post to see what they look like.
http://www.frrax.com/rrforum/index.php?sho...mp;hl=gta+wheel
or
http://www.frrax.com/rrforum/index.php?sho...mp;hl=gta+wheel

If memory serves, they weigh about 17-18 lbs. each on my bathroom scale.
I am near Indianapolis.
I will be at Autobahn SCCA national in Joliet IL on July 14-15; and can deliver there.
Email if interested. briandoll@comcast.net
I can also email pictures.

-Brian

Doesn't matter what they look like, or what style, just round and good lip/bead.

PM or email at autocrosser@gmail.com

Thanks