The good news is that most of the rear end is back together. I'm just waiting on the PHB which should arrive very shortly. I have to thank Garrett (Pimpmaro) for handling that job while we worked on the front end.
Garrett with his two favorite tools, a hammer and a screwdriver. Neither of which fit the rear suspension as I remember..... (IMG:
http://www.frrax.com/rrforum/style_emoticons/default/dry.gif)
When you install the weight jacks, the flat side goes up and the pigtail goes into the slot in the control arm.
Then, make sure you line up the notch (weld "bump") with the gap in the spring.
Stack it like so...
Slide it up into the spring perch.
And, lift the control arm into place with a small jack.
The new to me 1992 Z28, Photos and build information inside
May 26 2007, 03:59 AM
