[ibjamin]

ProSpeed Motorsports big brake kit. Uses Porsche 996 twin turbo calipers and rotors. Work great! Forget about your brakes for good with this system. Includes calipers rebuilt with new dust boots and seals. The rotors are almost new. I ran one day on them. Also includes almost new PF 01 race pads with that same 1 day use. Also comes with OEM Porsche street pads with about 1/3 pad left and a brand new set of stock Porsche street pads. SOLD

I also made custom, 1 piece 6061 aluminum spacers/rotor adapters to eliminate one problem area on this kit. All the stock pieces from the kit are included: spacers, adapters, brackets, lines, hardware, etc. Includes new, longer ARP wheel studs.

For reference, a similar kit is $2195 and don’t include pads. The stock Porsche pads are about $175 and the PF's are about $250. These brakes have been sitting around for a couple years since I removed them from the Z28. I was going to try and adapt them to fit my C5 but I couldn’t find a rotor that would work with them. I now have a set of AP Racing brakes for the Vette so it’s time to sell these.

Be-Cool Radiator for F-bodies. This is the polished version with an automatic tranny cooler in it. Needs to be cleaned up and re-polished if you are so inclined. Fins are in decent shape. These are almost $800 new. SOLD

LG Motorsports Torque arm for 6-speed. Works fine but cosmetically rough. The "wings" that bolt to the axle had been cut up to fit a 12bolt and the holes were elongated. I cut off the wings, fabricated new ones and had them welded on (with additional gussets). Welds could be cleaned up and painted and would look fine. $100

Clutch slave Brand new Z06 type. SOLD

All prices don’t include shipping. I prefer Paypal but if you use a credit card then you pay the 3% fee. Send me your e-mail for more pictures or something specific. E-mail is: ibjamin@wi.rr.com

George

This post has been edited by ibjamin: Mar 13 2008, 05:04 PM

[ibjamin]

back to the top