[Formula WS6]

I'm looking for a schematic showing how the temp gauge is wired in an 02 SS. The sender works fine and can be verified with both an IR gun and scanner. The fans also work as programmed. The gauge though reads high. Not sure where it's going wrong so I figured I would start with the wiring.

Thanks

[felton316]

I'm looking for a schematic showing how the temp gauge is wired in an 02 SS. The sender works fine and can be verified with both an IR gun and scanner. The fans also work as programmed. The gauge though reads high. Not sure where it's going wrong so I figured I would start with the wiring.

Thanks

I believe the 99-02's used the 'dummy gauge'. Basically, it points to normal once the car warms up, and if it exceeds the temp threshold, it points all the way hot. At least that's my understanding. The 98's with the 3 wire temp sensors were the last with real temp gauges.

Here is the wiring diagram that you requested.

(IMG:http://felton316.com/images/CarPics/wire.JPG)

This is the wire diagram from a 2000 LS1 Camaro.

This post has been edited by felton316: Jun 28 2008, 02:09 AM