![]() |
|
![]() |
![]()
Post
#1
|
|
newbie Group: Members Posts: 21 Joined: 5-December 04 From: W.Va. Member No.: 564 ![]() |
(IMG:http://www.frrax.com/rrforum/style_emoticons/default/banghead.gif)
Let me start off by saying I'm a shade tree mechanic and I haven't twiddled with this car or any for 12 years... I hadn't started it for a year (yes I know that's a horrible thing) It's summer and I thought I'ld clean it up and take it out get it legal inspection and blow the dust out Charged it up.. Tried to start it .. cranked it a few times.. then it started to fire up.. cranked it again.. fired up idled funny for a sec and then started to stall tried to stop it by giving it gas but it shut off I pumped it 2 times and tried to restart nothing just turns over and over took the breather off and gas is everywhere dripping out of the nut/spring adjustment on the right side if ur facing it Obviously it's flooded.. I tried drying everything off and not pumping it just to start it does the same thing cranks but won't turn over and sprays gas out of the hole in front of the valve opening Any suggestions on how to get it started or what could be the problem ? it's a 1987 camaro 305 4bbl 5 speed everything is pretty much stock garage kept with 120,000 miles This post has been edited by ibzeus1987z: Apr 28 2009, 02:41 AM |
|
|
![]() |
![]()
Post
#2
|
|
Member ![]() Group: Advanced Members Posts: 174 Joined: 25-January 08 From: Red Bluff Ca. Member No.: 2,094 ![]() |
When you tap on the carb. Do it next to where the fuel line goes in.
If it frees up the float & stops the over flow, Cool. Run it a while to see how it runs. If not or she doesn't run very well, It will probably need carb work. From dirt & varnish build up. I'd open it up & check it out, But then I turn wrenches for a living. A dirty carb is a pain. This post has been edited by TSHACK: Apr 28 2009, 03:20 AM |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 1st May 2025 - 05:16 PM |