[trackbird]

I have a Remington 700 Police in 6.8mm Rem Spc that I purchased over
the winter. I have fired about 55 rounds through it so far. It's built
(by Remington) on an HS Precision kevlar stock with a full length
aluminum bedding block, it has a 5 round internal magazine (though I
put a drop in single shot try in it), the trigger is quite crisp,
though maybe 1/2 lb heavier than I'd like (I'm guessing it's about 3.5
lbs, but I haven't weighed it). It's finished in any color you like,
as long as it's black.

It's a great rifle, but I'm trying to thin down some of my collection.
I always wanted a 700P, and I bought one. It's a great plinking rifle
and it makes recoil very similar to a .223 AR15. My girlfriend shot it
and didn't find it to be objectionable (and she didn't like the recoil
of my lightweight AR15 for reference). It's a nice rifle that you can
shoot all day.


I put Weaver 2 piece bases on it and I'll leave those with the rifle.
You'll need a standard set of scope rings to fit the objective of your
scope.


I also have the remains of 100 rounds of ammo (about 45 left) in US
Armory brass loaded with Sierra Matchkings and I have 100 pieces of
new Remington brass, still sealed in the bags as well as 100 Sierra
matchkings still sealed in the box and a set of Hornady dies, used for
100 rounds.


I have the box and papers from Remington.


$700 plus freight for the rifle
$130 for extra brass, dies and ammo plus freight


OBO



I have a new in the box Bushmaster AR15. It's a 16" with 6 position
stock, chrome lined barrel, flash suppressor, bayonette lug, notched
barrel for grenade launcher, detachable carry handle (handle is
included), 600 yard sights, hard case, sling and a 30 round mag. My
dealer lost the test target (or it didn't come with one). I purchased
this new (on sale) from Gander Mountain when supplies were really
tight (and I wasn't sure what I wanted in an AR, so I bought a few of
them). I paid $1160-ish for it ($1099.99 + tax). I've been debating if
I want to sell it, but if someone wants it for the sale price I paid,
I'll sell. I'm not looking for a profit, just to break even on it. I
have never loaded or fired this rifle. I haven't even run a patch
through it. It's as it came out of the case when I brought it home.

$1160.00 + freight $1075


I also have two new 10 round factory Sig Sauer magazines for a Sig Sauer P229 in 9mm. I will never use these, so if someone needs spares or lives in a 10 round limited state, this might be for you. Midwayusa shows factory 10 rounders for $34.99 plus freight.

$55 shipped OBO. $50


I have a brand new set of Kim Ahrends "slim" 1911 grips. These are a
grey color (with light and darker character stripes showing in the
finish, Ahrends calls them "silver/black laminate). They come with
slimline grip bushings and screws. I purchased them for one of my
pistols and couldn't get my grip bushings out to install the slimline
ones. So, they are new in the box. Kim Ahrends indicated that they
made the Wilson Combat wood grip panels. These are very similar to the
grey ones without the horizontal band in the center and there is no
medallion. They just have vertical grooves and are very nicely
finished. I loved these grips, but I've not used them yet and I see no
additional 1911's in my future. I paid $60 + freight


$50 shipped $45


I have a Bianchi thumbstrap holster for a 1911. This has an open
muzzle and will fit any length barrel. I carried a 3" and a full sized
5" 1911 in it. It's well "broken in", but quite functional. It's a
belt slide style holster and fits up to a 1.5" wide belt.


$25 shipped OBO $20


I have a Rafter S Gunleather holster from my Kimber Ultra Carry II.
It's for a 3" 1911 and is also black leather and a belt slide design.
It's in good, to very good condition (lightly used?). I did carry it
for something less than a year, but it's not been abused.


$45 shipped OBO


I have a Rafter S Gunleather single mag pouch (clips on your belt) for
a 1911. I carried this for less than a year and it too is in pretty
good condition.


$25 shipped OBO


I have a Rafter S Gunleather holster for a Sig 229 without the
picatinny rail. It's a little to upright for me for CCW use. I carried
it exactly one time. It would be a great holster for bowling pin night
or open carry/range days. It might work for CCW for someone else. I
needed a holster with more cant which makes the draw more difficult,
but makes it easier to hide the sig. It's also black leather and a
belt slide design. It's in new (not broken in/quite stiff) condition.


$50 shipped OBO


Combine any of the holsters (or all of them) and take $5 of each item
after the first one. I'll ship the whole collection to you for $5.


Factory Mossberg pistol grip conversion for a Mossberg 500 12 gauge.
This is new, unused and comes with the factory attachment hardware.


$40 OBO


I have assorted scope rings. I have the following (in the packages,
I'll mark what's new and what I used briefly).


Burris dovetail/windage adjustable matte set of Signature series steel
rings with the plastic inserts. These were on a Cooper 223 for exactly
100 rounds. Includes everything, even the allen wrench. PN 420511


$20 shipped


Leupold dovetail front/windage adjustable rear matte medium (.770
tall) rings. These look like I turned the front one into a mount, but
I don't think I actually installed a scope on them (there are no marks
on the rear from the windage screws). PN 49901


$20 shipped


Leupold dovetail front/windage adjustable rear (these aren't marked
matte or gloss? Appear to be "regular" and .900 tall) rings. These
look like I turned the front one into a mount, but I don't think I
actually installed a scope on them (there are no marks on the rear
from the windage screws). PN 49903


$20 shipped


Burris 30mm "Zee Rings". These are steel rings for a 30mm scope. They
are matte finish and "high". They fit a weaver/picatinny style rail. I
used these for a while to put a 56mm objective scope on a 10/22 I had
(I know, I know). They are in excellent condition, but were used for a
while. PN 420077


$45 shipped


Again, buy more than one set and take $5 off of each of the additional
sets. I have apparently been collecting scope rings in the process of
mounting scopes on various things over the years. Most of these are
virtually "mint" condition.


One rubber drop bumper for a Metalform 1911 mag with 4 installation
screws. This is new in the package. PN 62189 (metalform pn)


$3.00 OBO


Ruger GP100 rear sight blade inserts. Ruger PN E05904A-A. I have two
of these still in the bubble cards. Not sure why I purchased them. I
think that I thought they were something else.


$5.00 each OBO


Millet front sight for a GP100. I have one on my pistol, and I just
found one in a box. It's in good to great shape, but looks to have
been installed (rub marks on the finsh where it sits on the barrel,
nothing you can see). Millett PN FB00018.


$15


GP100 factory front sights. If you wanted one to modify, I have 2 of
them.


$5.00 each OBO


Wolff 17110 GP100 reduced power spring kit. Still sealed in the
package, new.


$18 OBO


Wolff 18 lb recoil spring and firing pin spring set for a Kimber Ultra
Carry II (or similar). PN 51818. New in the package.


$18 OBO


Remington 870 home defense (870 specific) trigger lock. This is a
"clamshell" design that is supposed to work with the 870 trigger
guard.


$10 OBO


I have a brand new Weaver TO-9 scope beas for a Ruger 10/22. It's
gloss black and still sealed in the package. It's probably not worth
shipping seperately, but if you want anything else listed, toss in $10
and I'll throw it in the box for you. I'm out of 10/22's and don't see
me dragging another one home soon (I know how that ends...typically
$1,400 later).


$10


Hex head, aftermarket 10/22 take down screw. Appears to be new/unused.


$10


Stock 10/22 parts (make offer on anything):


Factory bolt buffer (roll pin). I have 6 of them.
Factory magazine releases. I have 3 black and 2 silver.
Factory trigger group roll pins (pin the trigger group into the
receiver). I have 5 (not sure why it's not 4 or 6, but I have 5).
Factory bolt releases. I have 3. Make your own "rock n roll" bolt
release by modding these.
Factory extractors. I have 3. 2 of those look to have the correct
springs with them.
Factory firing pin (probably only a few rounds on it, if any).
Factory take down screw. I have 1.
Factory receiver screws to plug the scope rail mounting holes. I've
got a baggie full. It looks like there are a few silver and a bunch of
black ones. I have 16 screws total.


Who knows what else I have laying around here, but that's a good start
to some stuff that someone might find useful.


Thanks!


Kevin

[trackbird]

I have one person ahead of you, if it doesn't work out, you'd be next.

I'll keep you posted.

Thanks!