2000 Trans Am WS-6 – Legal for AIX, ITE, and similar classes - F-Body Road Racing and Autocross Forums

Current situation forcing sale. This car is the fastest "door-slammer" (formerly street legal) to have EVER turned a lap at No Problem Raceway (1:19.048). The car also won the Grand Bayou Race Series state championship for the 2008-2009 series. During a recent Viper Racing League outing, she was as fast or faster than all but 3 of the Vipers racing. I've owned this car from a 100% stock car and built it to what it is today. Her nickname is "The Red Rhino".

Modifications listed below. New clutch and drivetrain mods (denoted with "new" after each part). I know I'm missing some stuff.

DRIVETRAIN

- LS1 motor, fresh partial-rebuild w/ 0 miles, including:

o TR 230/224 .575/.563 111LSA "Reverse Split" camshaft (new)

o LS7 lifters (new)

o Comp Cams "925" double valve springs (new design, better resistance to fatigue from high RPMs) (new)

o Comp Cams tooled steel spring retainers (will not fatigue like titanium, almost as light) (new)

o Comp Cams 5/16" pushrods (new)

o New valve seals (new)

o Stock rocker arms w/ Comp Cams trunion bearings

o Refreshed "241" heads

o Manley double-roller timing chain (new)

o LS2 lifter trays (new)

o 3-layer metal head gaskets (new)

o ARP Pro-Series "Cracked Rod" rod bolts (new)

o New front and rear main seals, plus all gaskets (new)

- Lightweight clutch and flywheel (stock unit = 49.8lbs; this unit weighs 19.8lbs, and is smaller in diameter)

o 7.25" 3-disc Quarter Master Optimum-V clutch (new disc thickness = .104"; all 3 discs measure at .103")

o 7.25" button flywheel bolted to stock flexplate (new)

o ARP fasteners (new)

o Quartermaster 4.5"/5.5" floating-style hydraulic throwout bearing

o Steel braided lines, with accessible bleeder valve (new)

o McLeod adjustable master cylinder

- Racetronix fuel pump and wiring harness (new)

- Whisper filter lid

- Ported/polished throttle body (new)

- LS6 intake manifold

- Hooker 1.75" LT headers

- Freshly rebuilt transmission with 6 races

o Steel 3-4 shift fork w/ bronze fork pads

o New 1-2, 3-4 carbon-kevlar synchronizers

o New rings, spacers, washers, gaskets etc.

- Torsen T2R LSD (one of the "good" ones, before all the problems)

SUSPENSION

- Front

o Spohn front upper a-arms, fully adjustable w/ ¾" rod ends (new)

o Custom, adjustable lower arms (stock arms, with ends cut off and ¾" rod ends inside chromoly tubing) (new)

o Moog ball joints, upper and lower (new)

o 35mm hollow front swaybar

o 700lb springs

o Koni single-adjustable shocks, with coilover sleeves

- Rear

o Custom, adjustable, aluminum lower control arms w/ ¾" rod ends

o 275lb springs w/ adjustable perches

o Afco split-rate shocks

o Adjustable panhard rod

o Unbalanced Engineering de-coupled torque arm

o Hellwig adjustable ¾" swaybar

BRAKES

- Baer GT-Plus calipers (front)

- Baer 2-piece rotors, non-slotted/drilled (front)

o With Carbotech XP-12 pads front, AX6 pads rear, and Wilwood 570 fluid, I've never experienced fade or overheating

WHEELS

- 17x11 ZR-1 replicas w/ corded Yokohama slicks

- 18x10.5 C6 replicas w/ corded Goodyear slicks

MISC

- Full SCCA/NASA-legal cage

- Adjustable APR wing (300lbs downforce @ 100mph)

- Car lightened to less than 3000lbs including gas (great weight distribution and cross-weights)

- Momo FIA-approved seat w/ 5-point cam-lock harness

- Oil pressure, oil temp, water temp gauges w/ warning lights

- Large programmable tach w/ shift light

- Camera mount welded to roll cage

- Quick-release steering wheel

- Firebottle fire suppression system for driver and engine

- Lightweight battery w/ kill switch accessible by both the driver and workers at passenger window

- Covered all holes in front bumper for aero

This car is as fast as almost any door-slammer out there, but it can be so much faster. The car will be ready-to-race with just a fresh set of tires. I will deliver within a 2-hour trip of southeast Louisiana. A passenger seat is also available and can be installed in under 5 minutes. Ride-alongs for serious potential buyers are welcome, if you pay the track-day fee ($75).

$22,500 obo. Please call 985-981-6572 or e-mail at mpatterson1410@yahoo.com with any questions.

(IMG:http://i119.photobucket.com/albums/o145/mpatterson1410/NPR-leading-race.jpg)

(IMG:http://i119.photobucket.com/albums/o145/mpatterson1410/Inpits-pre-practice.jpg)

This post has been edited by 00 Trans Ram: Jun 29 2009, 07:58 PM

00 Trans Ram View Member Profile	Jun 29 2009, 06:29 PM Post #1
Experienced Member Group: Advanced Members Posts: 1,766 Joined: 10-April 04 From: New Orleans, LA Member No.: 303	Current situation forcing sale. This car is the fastest "door-slammer" (formerly street legal) to have EVER turned a lap at No Problem Raceway (1:19.048). The car also won the Grand Bayou Race Series state championship for the 2008-2009 series. During a recent Viper Racing League outing, she was as fast or faster than all but 3 of the Vipers racing. I've owned this car from a 100% stock car and built it to what it is today. Her nickname is "The Red Rhino". Modifications listed below. New clutch and drivetrain mods (denoted with "new" after each part). I know I'm missing some stuff. DRIVETRAIN - LS1 motor, fresh partial-rebuild w/ 0 miles, including: o TR 230/224 .575/.563 111LSA "Reverse Split" camshaft (new) o LS7 lifters (new) o Comp Cams "925" double valve springs (new design, better resistance to fatigue from high RPMs) (new) o Comp Cams tooled steel spring retainers (will not fatigue like titanium, almost as light) (new) o Comp Cams 5/16" pushrods (new) o New valve seals (new) o Stock rocker arms w/ Comp Cams trunion bearings o Refreshed "241" heads o Manley double-roller timing chain (new) o LS2 lifter trays (new) o 3-layer metal head gaskets (new) o ARP Pro-Series "Cracked Rod" rod bolts (new) o New front and rear main seals, plus all gaskets (new) - Lightweight clutch and flywheel (stock unit = 49.8lbs; this unit weighs 19.8lbs, and is smaller in diameter) o 7.25" 3-disc Quarter Master Optimum-V clutch (new disc thickness = .104"; all 3 discs measure at .103") o 7.25" button flywheel bolted to stock flexplate (new) o ARP fasteners (new) o Quartermaster 4.5"/5.5" floating-style hydraulic throwout bearing o Steel braided lines, with accessible bleeder valve (new) o McLeod adjustable master cylinder - Racetronix fuel pump and wiring harness (new) - Whisper filter lid - Ported/polished throttle body (new) - LS6 intake manifold - Hooker 1.75" LT headers - Freshly rebuilt transmission with 6 races o Steel 3-4 shift fork w/ bronze fork pads o New 1-2, 3-4 carbon-kevlar synchronizers o New rings, spacers, washers, gaskets etc. - Torsen T2R LSD (one of the "good" ones, before all the problems) SUSPENSION - Front o Spohn front upper a-arms, fully adjustable w/ ¾" rod ends (new) o Custom, adjustable lower arms (stock arms, with ends cut off and ¾" rod ends inside chromoly tubing) (new) o Moog ball joints, upper and lower (new) o 35mm hollow front swaybar o 700lb springs o Koni single-adjustable shocks, with coilover sleeves - Rear o Custom, adjustable, aluminum lower control arms w/ ¾" rod ends o 275lb springs w/ adjustable perches o Afco split-rate shocks o Adjustable panhard rod o Unbalanced Engineering de-coupled torque arm o Hellwig adjustable ¾" swaybar BRAKES - Baer GT-Plus calipers (front) - Baer 2-piece rotors, non-slotted/drilled (front) o With Carbotech XP-12 pads front, AX6 pads rear, and Wilwood 570 fluid, I've never experienced fade or overheating WHEELS - 17x11 ZR-1 replicas w/ corded Yokohama slicks - 18x10.5 C6 replicas w/ corded Goodyear slicks MISC - Full SCCA/NASA-legal cage - Adjustable APR wing (300lbs downforce @ 100mph) - Car lightened to less than 3000lbs including gas (great weight distribution and cross-weights) - Momo FIA-approved seat w/ 5-point cam-lock harness - Oil pressure, oil temp, water temp gauges w/ warning lights - Large programmable tach w/ shift light - Camera mount welded to roll cage - Quick-release steering wheel - Firebottle fire suppression system for driver and engine - Lightweight battery w/ kill switch accessible by both the driver and workers at passenger window - Covered all holes in front bumper for aero This car is as fast as almost any door-slammer out there, but it can be so much faster. The car will be ready-to-race with just a fresh set of tires. I will deliver within a 2-hour trip of southeast Louisiana. A passenger seat is also available and can be installed in under 5 minutes. Ride-alongs for serious potential buyers are welcome, if you pay the track-day fee ($75). $22,500 obo. Please call 985-981-6572 or e-mail at mpatterson1410@yahoo.com with any questions. (IMG:http://i119.photobucket.com/albums/o145/mpatterson1410/NPR-leading-race.jpg) (IMG:http://i119.photobucket.com/albums/o145/mpatterson1410/Inpits-pre-practice.jpg) This post has been edited by 00 Trans Ram: Jun 29 2009, 07:58 PM

00 Trans Ram View Member Profile	Jul 10 2009, 01:07 PM Post #2
Experienced Member Group: Advanced Members Posts: 1,766 Joined: 10-April 04 From: New Orleans, LA Member No.: 303	I'm trying, Julie. So far, I'm about halfway there between Ebay and returning crap to race stores that I bought for the summer buildup and didn't use (fluid plumbing parts, suspension parts, etc.).