Corbeau LG1 seats w/ custom roadrace brackets for 4th Gen - F-Body Road Racing and Autocross Forums

For Sale is my beautiful set of Corbeau LG1s. They have the provision for the crotch strap harness (5pt or 6pt harnesses). The brackets/sliders were custom built for the car. We removed the Corbeau sliders because they were weak and it did it right. These sliders/brackets were made with drag racing and road racing in mind (high load situations) and are FAR superior to the cheap stuff that they come with. All fabrication was done by Snyder Fabrication in West Chester, PA. See the "Cars" section for their amazing custom work and additional pictures of these brackets.

These were made to bolt directly into a 4th Gen using the stock location. I have almost $2000 into this setup (seats and fab cost)...the fabrication wasn't cheap, but that's how it goes for good work. I haven't priced them yet, but they're in almost brand new condition. I only put 2,500 miles on the car last year so there's no wear at all on them. I'm going with Kirkey Pro Drag seats and have no more use for the Corbeaus, but I LOVED them the one day that I went to autocross!

I'm going to take a pretty big hit on these as it is, I know that, but I also know they're basically brand new and someone would love to have all of this work already done. The other challenge is shipping, which I'm not sure how to approach, but that can be worked out once a deal is made. My thought is that the buyer will pay half of the actual shipping cost or can pick up/meet for the seats.

This setup BEFORE all of the fabrication would cost $1100+ new, I'm asking $1100 OBO.

ADDITIONAL PICS ADDED: http://s239.photobucket.com/albums/ff27/94...s%20For%20Sale/

Original Corbeau sliders/brackets:
(IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571438795177_26603204_33894471_630612_n.jpg)

New brackets/sliders:
(IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571438810147_26603204_33894473_3085289_n.jpg)
(IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs088.snc1/4916_571438815137_26603204_33894474_474409_n.jpg)
(IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571438909947_26603204_33894478_4378162_n.jpg)
(IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571438914937_26603204_33894479_2410116_n.jpg)
(IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571439423917_26603204_33894491_4545264_n.jpg)

In the car:
(IMG:http://i239.photobucket.com/albums/ff27/94z28rag/Camaroseats1.jpg)
(IMG:http://i239.photobucket.com/albums/ff27/94z28rag/Camaroseats5.jpg)
(IMG:http://i239.photobucket.com/albums/ff27/94z28rag/Camaroseats4.jpg)
(IMG:http://i239.photobucket.com/albums/ff27/94z28rag/Camaroseats3.jpg)

This post has been edited by 94Z28rag: Jun 24 2010, 03:32 PM

94Z28rag View Member Profile	Jun 15 2010, 07:22 PM Post #1
newbie Group: Advanced Members Posts: 34 Joined: 9-February 09 From: Manchester, NH / West Chester, Member No.: 4,005	For Sale is my beautiful set of Corbeau LG1s. They have the provision for the crotch strap harness (5pt or 6pt harnesses). The brackets/sliders were custom built for the car. We removed the Corbeau sliders because they were weak and it did it right. These sliders/brackets were made with drag racing and road racing in mind (high load situations) and are FAR superior to the cheap stuff that they come with. All fabrication was done by Snyder Fabrication in West Chester, PA. See the "Cars" section for their amazing custom work and additional pictures of these brackets. These were made to bolt directly into a 4th Gen using the stock location. I have almost $2000 into this setup (seats and fab cost)...the fabrication wasn't cheap, but that's how it goes for good work. I haven't priced them yet, but they're in almost brand new condition. I only put 2,500 miles on the car last year so there's no wear at all on them. I'm going with Kirkey Pro Drag seats and have no more use for the Corbeaus, but I LOVED them the one day that I went to autocross! I'm going to take a pretty big hit on these as it is, I know that, but I also know they're basically brand new and someone would love to have all of this work already done. The other challenge is shipping, which I'm not sure how to approach, but that can be worked out once a deal is made. My thought is that the buyer will pay half of the actual shipping cost or can pick up/meet for the seats. *This setup BEFORE all of the fabrication would cost $1100+ new, I'm asking $1100 OBO. ADDITIONAL PICS ADDED:* http://s239.photobucket.com/albums/ff27/94...s%20For%20Sale/ Original Corbeau sliders/brackets: (IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571438795177_26603204_33894471_630612_n.jpg) New brackets/sliders: (IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571438810147_26603204_33894473_3085289_n.jpg) (IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs088.snc1/4916_571438815137_26603204_33894474_474409_n.jpg) (IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571438909947_26603204_33894478_4378162_n.jpg) (IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571438914937_26603204_33894479_2410116_n.jpg) (IMG:http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs108.snc1/4916_571439423917_26603204_33894491_4545264_n.jpg) In the car: (IMG:http://i239.photobucket.com/albums/ff27/94z28rag/Camaroseats1.jpg) (IMG:http://i239.photobucket.com/albums/ff27/94z28rag/Camaroseats5.jpg) (IMG:http://i239.photobucket.com/albums/ff27/94z28rag/Camaroseats4.jpg) (IMG:http://i239.photobucket.com/albums/ff27/94z28rag/Camaroseats3.jpg) This post has been edited by 94Z28rag: Jun 24 2010, 03:32 PM