![]() |
|
![]() |
![]()
Post
#1
|
|
Experienced Member ![]() ![]() ![]() Group: Advanced Members Posts: 1,099 Joined: 14-October 06 From: Mobile, Al Member No.: 1,410 ![]() |
First time on r comps.
The front end is chattering in the corner, get on the gas and it fixes it cant carry any entry speed because of it. Tires are BFG R1's, pressures to start are 30F 26 R, end of session 34F 33R. I took the rear spring rubbers out and lowered the rear. The ass end was all over the place, this helped a bunch and dropped 3 seconds off the lap time. Go up or down on pressure or what? You enter the corner, the car starts to push and the tires chatter, skip, gas pedal pedal helps it. All input welcome. My new best is 2:02 at NOLA. |
|
|
![]() |
![]()
Post
#2
|
|
I build race cars ![]() ![]() ![]() ![]() ![]() Group: Advanced Members Posts: 4,748 Joined: 31-August 05 From: Central coast, CA Member No.: 874 ![]() |
Try backing off the front sb end link nuts a couple of turns. Make sure the Dbushings on the front sway bar are lubed and the bar rotates freely. I've seen poly bushings seized up here. That has to effectively add a lot of front spring rate.
And make sure everything else in the steering, Kmember and suspension is tight. Check the front hubs for play, they can chatter when worn. This post has been edited by Blainefab: Dec 1 2013, 08:00 PM |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 20th June 2025 - 10:40 AM |