![]()
Post
#1
|
|
Dave B ![]() ![]() Group: Advanced Members Posts: 292 Joined: 30-January 04 From: Whitby Ontario Member No.: 169 ![]() |
I have one of the last LT1 cars and need to upgrade to an LS1. The '01s and '02 are coming off lease and seem tempting.
I figure there must be somethings to look out for compared to the LT1. What are the common engine failure/warranty fixes? I know the power steering pump is a big problem for race track use. On my LT1 this was solved with pulleys but it has a remote reservoir. Are pulleys available for LS1 cars? Do they work or do I need a power steering cooler? Any easy fix for the rear wheel brake hop? This car will be used for street and track use including competition but the engine will be stock except for a lid and possibly headers ( if they are worth it) Also if I get an intake lid is there any difference in power between SS/WS6 cars and regular coupes? I will be altering the suspension significantly so it doesn't matter about the stock spring rates etc. Another small point. I bought my LT1 new and defintely did not want T tops as they seem to leak. If you have them do your T tops leak? It may take me a while to find a relatively loaded car without them. |
|
|
![]() |
![]()
Post
#2
|
|
Experienced Member ![]() ![]() ![]() Group: Advanced Members Posts: 1,042 Joined: 24-December 03 From: Hanover, PA Member No.: 36 ![]() |
QUOTE (John_D. @ Sep 27 2004, 09:39 AM) .... you should probably just go ahead and get a TurnOne power steering pump. A cooler might work. Some of the cars came with a cooler - it's tied into the radiator hose on that side. My '02 has been fine. No leaks. the PS cooler is an oil to water and is inside one of the radiator hoses. Steve |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 28th May 2025 - 03:24 PM |