[Blainefab]

Announcing Group Purchase pricing on Blaine Fab's Lexan rear spoiler: The spoiler replaces the OEM spoiler for approx 7# weight saving. All hardware is stainless steel and aluminum. Angle of spoiler is adjustable from approx straight up to approx 45deg layback. Adjustment is accomplished without use of tools. The spoiler is mounted by drilling 10 holes thru the rear of the decklid, and bolting it on. The RR version has been proven on ITE, AI and CMC cars.

Normal pricing (prices do not include shipping or CA sales tax for deliveries in CA) on the BF spoiler is:
Open Road Race 5" $390
Road Race 7.5" $400
Prepared autox 10" $430

For this GP, for a total of 3 to 5 sales (combined any version) I will drop the prices 15%, ie:
Open Road Race 5" $332
Road Race 7.5" $340
Prepared autox 10" $366

If the GP generates a total of 6 or more sales (combined any version) I will drop the prices 20%, ie:
Open Road Race 5" $312
Road Race 7.5" $320
Prepared autox 10" $344

I will leave the GP open for 10days, please post interest or questions on this thread. For a firm order, please PM me or email me at ablaine (at) cruzio (dot) com, or call the shop at 831 427-3296.

Here is the spoiler on a 94 T/A:

(IMG:http://www.geckoranch.com/cars/images/spoilerbig.jpg)

And on a 4th gen Camaro:

(IMG:http://gallery.noid.org/albums/album23/Picture_006.sized.jpg)


Thanks and regards,
Alan Blaine
Blaine Fabrication

This post has been edited by Blainefab: Apr 6 2006, 11:35 AM

[Blainefab]

Jon - Thanks for painting the patches - I punch them out of teflon coated fiberglass tape, and assumed that paint would not stick. How did you prep them for paint?

Rob - Ya, the coated Lexan is pretty pricey, and shipping is expensive too. UPS also managed to get something sharp thru 2 layers of cardboard and gouge the piece, leaving me with 1 spoiler worth of scrap.

Rob - I think standard auto tint on the spoiler would reflect light and appear opaque, much like what you would see if you look at a tinted hatch from the rear. Shields does offer a bronze tint on some pieces, but all sanctions that I know of prohibit tint front and rear so I would not recommend it for the spoiler, 'cept mebbe on an autocross car.

What you all will find is that the spoiler sucks up a layer of dust and grit on the backside - Use a recommended cleaner: http://racingshields.com/index_files/care.htm and rinse with lots of water. Never rub it dry. If you remove the Lexan panel from the brackets to clean it, do not overtighten the screws when replacing - just snug and then back off 1/8 turn.