[trackbird]

I know there was some interest in these on the board, and we have a thread about it in one of the forums right now. So, if anyone is interested.

I just hung up with ACPT. If we can GP 5+ of these, they will be $200 off of the regular $795 and $40 freight (48 states of the US only). Meaning, $595 each (plus shipping).

The tech info is this:

Aluminum yokes.
800 ft lbs torque rating
3 1/4" OD
12,500 RPM critical speed

For an additional $100 you can have (and I know you guys will love this one).....

3 3/4 OD
2000 ft lbs torque rating
14,500 RPM critical speed


Anyone interested?

[Cal]

The ACPT CF driveshaft may soften the shock, but it won't save weight. Mine was about a pound heavier than the stock aluminum LS1 driveshaft. The big advantage is a much higher critical speed and the much safer "brooming" action if it breaks.

[Rampant]

The ACPT CF driveshaft may soften the shock, but it won't save weight. Mine was about a pound heavier than the stock aluminum LS1 driveshaft. The big advantage is a much higher critical speed and the much safer "brooming" action if it breaks.

It should save a few off the weight of my current DOM tubing DS. It is close to 25 lbs with 1350 yokes.

I like the idea of the safer brooming too, but would hope it would never happen.


Rampant