CMC Firebird Available - F-Body Road Racing and Autocross Forums

I'm posting this as a heads up in case anyone just has to have a good CMC car for next year (aiming at the folks on the East Coast). We don't really have to sell this car, so it isn't going to be a steal. Anyway, here it is:

89 Firebird
Fresh 305 TPI (2 events)
Underdrive pulleys
2.5" y-pipe into 3" exhaust with muffler, turndown in front of axle
T5 trans with Hurst shifter
Fresh built rearend, new Moser axles, new Torsen T2R (2 events)
3.23 gears
Baer 12" front brakes with PBR calipers
Front brake cooling ducts
LT1 rear brakes
Braided brake lines front and rear
Wilwood brake proportioning valve, driver accessible
1050 lb. front springs
225 lb. rear springs
WS6 sway bars
Bilstein struts
Koni SA rear shocks
Ground Control (IIRC) camber plates
Ground Control front control arm bushings
Rodended rear control arms
Double rodended panhard bar
ATL Fuel Cell
New fuel pump (2 events)
K&N cone air filter setup
Adjustable fuel pressure regulator
Accusump
Aluminum radiator
Subframe connectors
Modified Autopower rollcage
Sparco race seat
Fresh G-Force FIA Certified Camlock Harness (good for 5 years)
Quick disconnect steering wheel
Autometer gauges and shiftlight
Low oil pressure light
Firebottle Halon system
Optima battery, relocated to rear
Lightweight GTA wheels
Shaved Toyo RA-1 tires (2 events)

This car has a lot of good, fresh parts on it. Two wins and a second out of four races since I put it on the track as a CMC car. Turned consistent 1:28's in last race at Summit Point, still has some time left on the table. Should be good for consistent 1:27's at Summit when driven to its potential (I'm still knocking the rust off after a 3 year hiatus from racing).

It is not the prettiest car out there. It has scratches, dings, and dents. It received a nice bump from a FFR Cobra at the last race, behind the right rear wheel, which we will be fixing. But, it is a mechanically strong car. We'd be looking for close to $10k right now, which does depend somewhat on whether we include our second set of GTA wheels and some other spares. If that's too much, so be it...I'll just keep racing it next year.
(IMG:http://www.frrax.com/rrforum/style_emoticons/default/biggrin.gif)

(IMG:http://www.krichbaum.net/gallery/albums/userpics/IMG_1533.JPG)

GaryK View Member Profile	Oct 27 2005, 03:26 AM Post #1
Advanced Member Group: Advanced Members Posts: 289 Joined: 30-December 03 From: Verona, VA Member No.: 71	I'm posting this as a heads up in case anyone just has to have a good CMC car for next year (aiming at the folks on the East Coast). We don't really have to sell this car, so it isn't going to be a steal. Anyway, here it is: 89 Firebird Fresh 305 TPI (2 events) Underdrive pulleys 2.5" y-pipe into 3" exhaust with muffler, turndown in front of axle T5 trans with Hurst shifter Fresh built rearend, new Moser axles, new Torsen T2R (2 events) 3.23 gears Baer 12" front brakes with PBR calipers Front brake cooling ducts LT1 rear brakes Braided brake lines front and rear Wilwood brake proportioning valve, driver accessible 1050 lb. front springs 225 lb. rear springs WS6 sway bars Bilstein struts Koni SA rear shocks Ground Control (IIRC) camber plates Ground Control front control arm bushings Rodended rear control arms Double rodended panhard bar ATL Fuel Cell New fuel pump (2 events) K&N cone air filter setup Adjustable fuel pressure regulator Accusump Aluminum radiator Subframe connectors Modified Autopower rollcage Sparco race seat Fresh G-Force FIA Certified Camlock Harness (good for 5 years) Quick disconnect steering wheel Autometer gauges and shiftlight Low oil pressure light Firebottle Halon system Optima battery, relocated to rear Lightweight GTA wheels Shaved Toyo RA-1 tires (2 events) This car has a lot of good, fresh parts on it. Two wins and a second out of four races since I put it on the track as a CMC car. Turned consistent 1:28's in last race at Summit Point, still has some time left on the table. Should be good for consistent 1:27's at Summit when driven to its potential (I'm still knocking the rust off after a 3 year hiatus from racing). It is not the prettiest car out there. It has scratches, dings, and dents. It received a nice bump from a FFR Cobra at the last race, behind the right rear wheel, which we will be fixing. But, it is a mechanically strong car. We'd be looking for close to $10k right now, which does depend somewhat on whether we include our second set of GTA wheels and some other spares. If that's too much, so be it...I'll just keep racing it next year. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/biggrin.gif) (IMG:http://www.krichbaum.net/gallery/albums/userpics/IMG_1533.JPG)

GaryK View Member Profile	Oct 23 2006, 04:30 PM Post #2
Advanced Member Group: Advanced Members Posts: 289 Joined: 30-December 03 From: Verona, VA Member No.: 71	Current pics are at this link.