[Blainefab]

I've put together an upgrade package for the 3rd/4th gen Fbods - 3rd gens especially will break axles under the stress of RR duty, and I've cracked a 4thgen axle. Dragstrip use with slicks will break them, too.

These axles are direct replacement, use OEM wheel bearing and seals (not included) and fit any of the popular diffs (also not included).

Package includes:
1 Pair Yukon Replacement Series axles for 93-02 4th gen non TC cars or TCS cars
10 ARP 100-7708 2.5" long wheel studs, pressed in place
10 Dorman short, open bulge lugnuts with 19mm (same as 3/4") hex

Cost is (call, prices vary with application) plus shipping plus CA sales tax on orders shipped to CA address.

for the front, extra set of 10 ARP studs $32
for the front, extra set of 10 Dorman lugnuts $16

Extra long 3.25" ARP 100-7713 studs are available, set of 10 $72

questions/comments PM me or email me at ablaine (at) cruzio (dot) com or call me at 831 427-3296 evenings PST

Regards,
Alan Blaine
Blaine Fabrication

edit: Superior raised prices by $10 per axle, so I had to raise the package price from $185 to $205
edit: another price increase, to $215 for the package
edit: added pics of my cracked OEM axle - I found this after a rather spirited session at Sears Point. Glad it didn't let go there! The crack goes all the way around and thru the hub flange, and has started to twist off.
edit: the yearly price increase happened: new price for the package is $231 + changed to Dorman nuts
edit: price increase to $350
edit: price drop to $295
edit: revise pricing on ARP/Dorman
edit: change to Yukon, revise pricing

(IMG:http://www.skyhighway.com/~bfpix2/IMG_1478.JPG)

(IMG:http://www.skyhighway.com/~bfpix2/IMG_1479.JPG)

(IMG:http://www.skyhighway.com/~bfpix2/IMG_1480.JPG)

This post has been edited by Blainefab: Apr 27 2015, 04:50 PM

[GlennCMC70]

difference between the 93-96 and 98-02 is the center hub that fits into the wheel, correct? so if i ordered the 98-02's to work w/ my 95, i could more easily use the 98-02 wheels, right?

[Blainefab]

difference between the 93-96 and 98-02 is the center hub that fits into the wheel, correct? so if i ordered the 98-02's to work w/ my 95, i could more easily use the 98-02 wheels, right?

Glenn - Yep, LS1 just have a smaller OD hub so fit 98-02 and Corvette wheels without clearancing them.

LT1 or LS1 Axle package $185 plus UPS gnd to central TX $39 = $224 PayPal to: ablaine (at) cruzio (dot) com

(Mitch paid less shipping 'cause I used the shipping weight of the 3rd gen axles to me to base my quote on - turns out, after adding the 1.7" longer 4th gen axles, and the studs and nuts that the UPS bill is a little higher. SO if you buy the package, Mitch owes you a beer, on me ;-) )

Thanks!
Regards,
Alan Blaine
Blaine Fabrication
831 427-3296