[Blainefab]

This is the QD SOLD from Kens column - it lost a gymbal pivot pin so we retired it in favor of a Woodward column. This QD is still tight, I think it is the Grant 3001 that Summit sells for $120 - buy this package of parts for $75

Quick disconnect - bolts on to any 3rd or 4th gen, C4, probably C5, dunno bout C6 or 5th gen. No welding
spacer and 3 bolt hardware/nut
4th gen modified lock ring and circlip - I've cut the teeth off, ready to swap onto your column
firewall spacer

Here it is on the column - the rest of the column is destined to be melted down to make some Chinese POS, all because of the crappy gymbal screw that fell out and lost itself.

(IMG:http://www.blainefabrication.com/projects/2011_10_15/IMG_4663.JPG)

Here is how the parts will look like on your column:

(IMG:http://www.blainefabrication.com/projects/2011_10_15/IMG_4664.JPG)

Here is the package you are bidding on:

(IMG:http://www.blainefabrication.com/projects/2011_10_15/IMG_4665.JPG)

The firewall plate - WTF is that? Well, Ken's headers were real close to the intermediate shaft, so I redrilled the column attachment holes so that the bottom of the column swung outboard for clearance to the headers, and the top of the column swung inboard to get the steering wheel a little further inboard, away from the other guy. That all left a gap at the firewall and the plate plugs it.

(IMG:http://www.blainefabrication.com/projects/2011_10_15/IMG_4662.JPG)

(IMG:http://www.blainefabrication.com/projects/2011_10_15/IMG_4660.JPG)

This post has been edited by Blainefab: Sep 29 2012, 06:27 PM