 Forgeline RS wheels, Trying to make room in the garage |
|
|||||||||
  |
 Dec 29 2004, 01:17 PM
Post
#41
|
|
|
FRRAX Owner/Admin  Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196  |
QUOTE (MikeP-99Z @ Dec 29 2004, 01:31 AM) Interested in the math here... isn't offset calculated from the centerline of the rim? http://www.usacomp.com/Offset.htm Yup, it is. And, I think I figured it wrong. |
 |
 
|
|
Dec 29 2004, 01:22 PM
Post
#42
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
Ok. Now that I'm awake, I just refigured it. The specs are:
F: 17x9.5 60.325mm backspacing R: 17x11 68.2625mm backspacing I think the math works on those numbers. I was figuring 3/16 as 3/8ths last night among other problems..... |
|
|
|
|
Dec 29 2004, 01:26 PM
Post
#43
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
QUOTE (231go @ Dec 28 2004, 11:55 PM) Im not as worried about the fit as I am them being legal. My car is run in A-Stock and I need a 17x9.5 w/ 56mm front and 17x11 50mm in the rear. Rules say that I can go +/-.25 of an inch, but thats all. I would measure my 17x9.5's, but I don't have any 17x11's to look at. Offset for the front should be at 2.2 and the rears at almost 2 inches. I think the fronts may be legal, the rear may need a 13mm (1/2") spacer to be legal. Based on a tolerance of 6.35mm (.25"). You needed a 56mm front, these are 60.325. The rears are 68.2625mm and you need 50mm, so a 1/2" spacer would get you "there". That makes more sense. |
|
|
|
|
Dec 30 2004, 12:37 AM
Post
#44
|
|
|
F-bodyless.... Group: Advanced Members Posts: 243 Joined: 31-December 03 From: Austin, TX Member No.: 77 |
I still think im going to pass. I would need to run a big spacer just to be legal, and if anything I wanted to leave room for a 1/4" spacer on top of the stock 50mm offset in case I have clearance issues w/ the 335's. I wish you were a little closer so that I could throw them on and see just how much clearance I would have, ow well..
|
|
|
|
|
Dec 30 2004, 01:19 AM
Post
#45
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
No problem.
|
|
|
|
|
Dec 30 2004, 02:36 AM
Post
#46
|
|
|
Member Group: Advanced Members Posts: 122 Joined: 30-January 04 Member No.: 173 |
According to my rough calculations I get that the fronts are 42mm offset and the rears are 56mm.
See this site for a good visual reference: http://www.skulte.com/adapterfaq.html A 50mm 17x11 has 7.93" of backspacing. so if yours measures 8 3/16"; that is about 1/4" more or 56mm A 38mm offset 17x9.5 has 6.7" of backspacing. so yours measures 6 7/8"; that is about 3/16" more or about 42mm. George E. |
|
|
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 6th June 2025 - 02:12 PM |