IPB

Welcome Guest ( Log In | Register )

Blaine Fabrication.comUnbalanced EngineeringUMI PerformanceSolo PerformanceHotpart.com
 
Reply to this topicStart new topic
> 48 row oil cooler with fan, brackets and shroud $100
Blainefab
post Aug 10 2016, 04:22 AM
Post #1


I build race cars
*****

Group: Advanced Members
Posts: 4,748
Joined: 31-August 05
From: Central coast, CA
Member No.: 874



This setup is lightly used, I built it for a Subaru Sti, my customer did a couple track days with it, then got a job with Ebay and parked the car. Probably less than 10hrs run time on it - motor was fine so it should be clean but best to thoroughly clean any used oil cooler before putting back into service.

Cooler is a stacked plate 48 row, 11" x 11" x 1.5", the brand name is under a bracket, it says made in Canada. It's probably a B&M or Derale. Ports are 1/2" NPT, fittings are -10AN.

Fan is 12" dia Permacool, brackets and partial shroud are custom Blaine Fab. The whole fan/cooler/shroud assy is about 16" tall by 12" wide x 4-1/4" thick, could be adapted to fit a variety of other radiators, or used as a stand alone. New cost on the cooler and fan is about $215, I'm asking $130 plus shipping - that includes the brackets, AN fittings, cooler and fan, but not the radiator. How about $100

It is currently mounted on an aftermarket aluminum Sti (I think it was a 2005 model) radiator, which is not included, but if you need the radiator too, let me know and I'll get details on it and cut a good deal.

(IMG:http://blainefab.com/projects/2016-08-09/1-004.JPG)

This post has been edited by Blainefab: Sep 25 2017, 10:14 PM
Go to the top of the page
 
+Quote Post
Blainefab
post Sep 25 2017, 10:15 PM
Post #2


I build race cars
*****

Group: Advanced Members
Posts: 4,748
Joined: 31-August 05
From: Central coast, CA
Member No.: 874



QUOTE (Blainefab @ Aug 9 2016, 09:22 PM) *
This setup is lightly used, I built it for a Subaru Sti, my customer did a couple track days with it, then got a job with Ebay and parked the car. Probably less than 10hrs run time on it - motor was fine so it should be clean but best to thoroughly clean any used oil cooler before putting back into service.

Cooler is a stacked plate 48 row, 11" x 11" x 1.5", the brand name is under a bracket, it says made in Canada. It's probably a B&M or Derale. Ports are 1/2" NPT, fittings are -10AN.

Fan is 12" dia Permacool, brackets and partial shroud are custom Blaine Fab. The whole fan/cooler/shroud assy is about 16" tall by 12" wide x 4-1/4" thick, could be adapted to fit a variety of other radiators, or used as a stand alone. New cost on the cooler and fan is about $215, I'm asking $130 plus shipping - that includes the brackets, AN fittings, cooler and fan, but not the radiator. How about $100

It is currently mounted on an aftermarket aluminum Sti (I think it was a 2005 model) radiator, which is not included, but if you need the radiator too, let me know and I'll get details on it and cut a good deal.


Still available, lowered the price
Go to the top of the page
 
+Quote Post
Blainefab
post Sep 29 2017, 12:07 AM
Post #3


I build race cars
*****

Group: Advanced Members
Posts: 4,748
Joined: 31-August 05
From: Central coast, CA
Member No.: 874



Gene - I PM'd the shipping, $21 UPS

Regards,
Alan
Go to the top of the page
 
+Quote Post
CrashTestDummy
post Sep 29 2017, 04:47 PM
Post #4


Veteran Member
*****

Group: Advanced Members
Posts: 3,792
Joined: 3-July 04
From: Pearland, Texas
Member No.: 385



Alan,

Got it. Sorry, yesterday was a little hectic. Money sent! Thank you.
Go to the top of the page
 
+Quote Post
Blainefab
post Sep 30 2017, 02:57 AM
Post #5


I build race cars
*****

Group: Advanced Members
Posts: 4,748
Joined: 31-August 05
From: Central coast, CA
Member No.: 874



Sold, and shipped.

Thanks Gene!
Go to the top of the page
 
+Quote Post
CrashTestDummy
post Oct 5 2017, 06:50 PM
Post #6


Veteran Member
*****

Group: Advanced Members
Posts: 3,792
Joined: 3-July 04
From: Pearland, Texas
Member No.: 385



Alan, The box was handed to me this afternoon. I haven't opened it yet, but the box looks fine.

Funny, we have a new UPS driver, as the current guy is slowly working his way into retirement. So the old guy was showing the new guy the residential customers. The truck showed up with an escort, the old guy's F250 CC!! Delivering very important parts, no doubt! (IMG:http://www.frrax.com/rrforum/style_emoticons/default/2thumbs.gif)
Go to the top of the page
 
+Quote Post
CrashTestDummy
post Oct 11 2017, 03:58 PM
Post #7


Veteran Member
*****

Group: Advanced Members
Posts: 3,792
Joined: 3-July 04
From: Pearland, Texas
Member No.: 385



Looks good. Still not sure what I'll do with it, but the price was right. The picture didn't do the size justice. It's bigger than it looks in the picture above. Thanks, Alan!
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 28th March 2024 - 07:08 PM