Printable Version of Topic

Posted by: JimMueller Jul 14 2018, 11:10 PM

Due to quantity of items, pictures available upon request. All prices exclude shipping, insurance, PayPal fees, etc. If you buy multiple items of different types we can discuss a bulk discount. Reasonable counteroffers considered. I might be interested in some trades, I would need to come up with a list of what I'd be interested in.

Edit: some prices reduced again. Some prices advertised lower here than at LS1Tech, including the Koni DA's.

For sale:

Brakes/suspension:
* ACDelco 17D750MH rear brake pad kit, installed for maybe 1-2 weeks removed because I wanted more rear brake force, 0.393"-0.417" pad thickness remaining, kit $28.89 new from RockAuto, free with another purchase
* AFCO 8"x5"x300lb conventional spring set (PN AFC25300-3), flat ground on both ends, (pair, yellow), @67oz, $50
* Eibach 9.5"x5"x300lb conventional spring set (PN 0950.500.0300), flat ground on only one end (pair, red), @68oz, $50
* Hypercoil 11"x5"x300lb conventional spring set (PN 18SN-300) flat ground on both ends, (pair, blue), @85oz, $50
* AFCO 10"x2.5"x650lb coil over spring set flat ground on both ends, (pair, yellow), @94oz, $50
* Koni Double-adjustable front coil over shock assembly kit (PN 8242-1005SP1, inspected by Koni in 2014, receipt provided) with Hypercoil 650# (PN 10B0650) springs, includes custom BlaineFab tool ($40 value) to remove top hat, Koni rebound adjuster tool and OEM upper shock mount (free, if desired) (one pair, est @8.5lbs), $650
* Koni Double-adjustable front shock (PN 8242 1005SP1) (spare, inspected by Koni in 2014, receipt provided, needs top hat installed (included)), (8.2lbs, 1 available), $275
* Koni Double-adjustable rear shock set (PN 8242-1006SP1) (inspected by Koni in 2014, receipt provided), (pair, @5.2lbs), $650
* Bilstein rear HD shock set (F4-B46-1121-H0), low miles, been sitting in storage, @4lbs, $80 in original boxes
* AllStar PN ALL56119 threaded weight jacker kit, sits on OEM lower spring perch, used to adjust ride height of 5" conventional springs, $25 for pair, or free with purchase of one pair of 5" springs
* Unbalanced Engineering rear steel lower control arm kit, ~14 years of use, with steel bushings, jam nuts & 3yr old FK heim joints (two need replaced, not included), replaced arms to save weight, $100

[Bare bar only, no accessories included]
* Suspension Techniques 35mm solid front antisway bar, 26lbs, $100
* Addco 32mm solid front antisway bar, 21.5lbs, $50
* GM 30mm hollow front antisway bar, 9.5lbs, $50
* Addco 25mm solid rear antisway bar, 12.5lbs, $50
* Unknown 24mm solid rear antisway bar, 9.5lbs, $50
* GM 19mm hollow rear antisway bar, 6.65lbs, $50

Wheels:
* Enkei Win3, 17"x9.5", @24lbs, bought in 1996 and used as daily driver wheels until 2010, set of 4 plus one spare (spare has gouged metal lip), $250 for normal 4, damaged spare is free if you buy the other 4 at my price.
* AFS ZR1 polished aluminum replicas, 17"x11", 50mm offset, 4 available, @28lbs, approximately 15 years old, originally only used as autocross wheels, but became daily driver wheels in 2010, slight brake dust accumulation and slightly cloudy finish, $450

Engine:
* FAST Fuel injector harnesses, EV1 <>EV6 injector adapters, PN 170604-8, used, $25
* Scoggin Dickey SD90BRKT throttle cable bracket, $20
* Scoggin Dickey Billet throttle cable bracket, w/ 2 long bolts, $20
* BlueMaxx 90mm cable-driven billet throttle body, purchased through Vengeance Racing maybe around 2008? No bolts or sensors, $100
* OEM 1998 F-body LS1 screened MAF & accordion hose, $20
* Crane Cams 3/8" pushrods, installed as a set of used 7.400's from Vinci Performance, after they came back out it was determined that they were not all truly 7.400's. (2) ~7.45, (12) ~7.410 & (2) ~7.360; $100 for all
* March 208 billet alternator pulley, never installed, $30

Misc:
* Valentine 1 radar detector w/ suction cups (need replaced) and power wiring, bought used in early 1990's, $50
* Tesla Original GTech accelerometer, worked when removed from vehicle years ago, free with another purchase
* B&B Electronics AutoTap w/ cables, no software, worked the last time it was used, free with another purchase
* LS1-Edit for 97-98 F-bodies, with cables, no software, worked the last time it was used, free with another purchase

Posted by: JimMueller Jul 20 2018, 11:59 PM

bump

Posted by: JimMueller Aug 18 2018, 01:00 PM

Bump, some prices further reduced.

Posted by: ESPCamaro Sep 2 2018, 06:33 PM

PM’d ya Jim

Posted by: JimMueller Nov 4 2018, 10:40 PM

I've been hoarding boxes to ship this stuff, and the boxes are getting in the way. If I throw out the boxes, I'll have to buy packaging to ship them in the future. Prices lowered again in the hope I can move some of the larger items before discarding the boxes.

Posted by: kevind43 Nov 13 2018, 10:15 PM

PM sent

Posted by: landstuhltaylor Nov 30 2018, 07:29 PM

Does the throttle cable bracket work with the 102mm units?

Posted by: JimMueller Dec 3 2018, 05:45 AM

I do not know since I don't own a 102mm TB to verify.

https://www.summitracing.com/parts/nwp-sd90brkt
https://sdparts.com/i-22714833-sdpc-sd90brkt-ls-throttle-cable-bracket.html

I can't find an advertisement for the billet bracket at this time.

Tangent, I'd really like to get these Koni DA's unloaded for a reasonable price. Any idea on fair market value? They were bought new in roughly '97, inspected and/or rebuilt in 2014.