93-02 Spohn Adjustable Torque Arm

Spohn Adjustable Torque Arm for 1993-2002 F-cars. Functionally perfect. No driveshaft loop. Some scraps on the tunnel mount. $295 plus shipping
Here is the site with the unit specifications. Mine has the poly bushing. E-mail me with questions or pictures of the actual torque arm.

http://www.spohn.net/shop/1998-2002-GM-F-B...td-Exhaust.html

maggieandbill@comcast.net

JE Forged Pistons for 400 SBC w/std. bore, 6" rods

Brand new full set of eight JE forged pistons for a standard bore 400 with a 6" rod. These were a custom run that is desireable because the oil ring does not invade the pin hole which is typical in 400s with 6" rods. The ring pack was narrowed to accomodate this feature. The ring package is .043, .043, .118 (3mm). This thin ring package produces substantially less drag which means more available horsepower. These pistons cost $850. I'm selling them for less than 1/2 the price. $350 plus shipping. Pics available upon request.

New Forged JE Pistons for SBC 400.

Full set of 8 brand new JE forged Pistons for 400 SBC with 6" rods. Std. bore. Perfect for new SPH Motown or Dart blocks...or someone lucky enough to own a good standard production block. I also could make it a nice rotating assembly. I have a brand new Series 9000 SCAT crank with 6" Lunati 4340 rods already cam clearanced for this combination.

$390 plus shipping for just the pistons.

$700 plus shipping for entire rotating assembly

What's unique about these custom JE pistons is they use a modern narrow ring package. This enables the rings to be used without a support rail for the pin area. Very desirable. The rings are off the shelf items supplied by most ring manufactures.
Please e-mail me with any questions or would like pictures.
maggieandbill@comcast.net

Spohn Torque Arm Needed

I bought a Spohn crossmember from a third gen owner that was converting to a T56. He was going to reuse his Spohn torque arm when installing the Spohn T56 crossmember. I need to purchase a Spohn torque arm but it needs to be the newer design with the heim joint on the end. If you can help, please let me know.