Printable Version of Topic

Posted by: rmackintosh May 18 2011, 05:31 PM

I am finally getting the list of things that no longer fit on my Camaro after all the Cortex/Stoptech changes together and putting them up for sale. ALL PARTS LISTED WERE NOT ON THE CAR DURING MY BIG WRECK.

These parts are parts that were taken off the car during the pre season build up of suspension and brakes. If I had not upgraded my suspension and brakes, and the car was still alive, I would be driving on this equipment today.

NEW PRICE $1000 Entire front suspension set up from my car ( less the upper and lower control arms and shocks). Porsche 996 Brake calipers and rotors, Custom cooling ducts into center of rotor, decent used pads. Spare used hubs and spare used rotors. This is the exact setup that was on my car until the Cortex/Stoptech upgrade a few months ago.

NEW PRICE$350 One set of silver ZR1 Corvette wheels. OE Concepts 50mm offset. Has set of Goodyear RS tires that have 4 heat cycles on them mounted.

NEW PRICE $250 One set of BRAND NEW Raybestos ST43 Front Brake Pads for the Porsche 996 brake calipers. I loved the Raybestos for feel, lack of fade and ease on rotors. These are a step up from the Pagid Blacks I was using ($399 new)

NEW PRICE$75 Two individual silver ZR1 Corvette wheels. OE Concepts 50mm offset. Tires are OLD, and can be dismounted before shipping.

$15 Six sets of new 1.5mm metric acorn lug nuts

SOLD One set of LGM Front Lower Control Arms. Powder coated a wrinkle finish black, and in perfect shape.

SOLD Pro 5.0 shifter stick new....6" long

SOLD Bump Steer kit. Used 1/2 a season....$170 new.

SOLD One set of UMI Front Upper Control Arms. The newer ones with the ball joint plate moved for better travel/location. Powder coated wrinkle finish black.

SOLD One set of Front Upper Control Arm Mounts converted for hiem jointed race shock mounting. Powder Coated gloss black

SOLD One set of 46mm CCW Classic wheels with black annodized centers. Mounted with Goodyear RS tires that have about 8 heat cycles left on them. One wheel has a scar from a hit 3 years ago when they were 30 minutes old, but all balance true.

SOLD Pro Stop 2 Piece rotor setup. One used rotor left for a pattern to send to Coleman to have new rotors made, Other rotor is gone. Set up for the Porsche 996 brake kits.

All prices are negotiable and BO. Let me know if you have any questions or suggestions.

I will be starting another thread soon with the parts left over from the wreck. I need to go through that stuff a bit closer to inspect and be honest with what I have and what will work.

Thanks...

Posted by: bowtieboy May 18 2011, 07:30 PM

Are the rims 17" ?
.........and if so, are they 9, 9.5 or 11's ?

Posted by: StanIROCZ May 18 2011, 10:41 PM

Does this use a bolt or a tapered pin? I assume this uses a rod end with an long adjuster sleeve? Anyone know if the thread for the 4th gen rack is LH 5/8"?

Posted by: rmackintosh May 18 2011, 10:46 PM

Sorry, all the rims are 17" and of 11" widths. Thanks.

Posted by: rmackintosh May 18 2011, 10:49 PM

This has the tapered pin. It is the same kit you can get from Spohn, where I bought if from. Thanks.

Posted by: msn99ss May 19 2011, 04:16 AM

I am interested in the front lower control arms, PM sent. regards, Stephen

Posted by: rmackintosh May 19 2011, 05:10 PM

Some photos...I can take more if needed.

The CCWs:



The OE Concepts Wheels:


Modified upper A Arm/race shock mounts:


Upper A Arms:


Bump Steer Kit:


Porsche Calipers:



Pro Stop 2 Piece Rotors:


Pro 5 Stick:


Lug Nuts....only LOTS more:


Will keep updating this post with more pics.....

Posted by: rmackintosh May 19 2011, 05:17 PM

The modified uprights to hold custom brake ducts...spare used hubs and rotors:

Posted by: Racing Geek May 19 2011, 08:01 PM

Is that $15 for all 6 sets of lug nuts?


Edit: How far down is the bottom of the bump steer kit from the bottom of the spindle where it connects? I could use it but don't know if it will clear.

Posted by: 1qwikbird May 19 2011, 08:03 PM

I'll take the Pro 5.0 Stick. I sent you a PM earlier.


Thanks
Chris

Posted by: rmackintosh May 19 2011, 09:24 PM

Gotcha...will respond as soon as I catch up. Thanks.

Posted by: rmackintosh May 19 2011, 09:26 PM

Sure, but I could charge you more if you like. I have a shot of all of them sitting there.

The bump steer should fit. I used 17" wheels with them and I had to cut the stud on the rod end side so that they would clear the rims. If you have 17"+ you should be fine.

Posted by: rmackintosh May 19 2011, 09:28 PM

And the LGM Lower Front A Arms:

I had the ball joints pressed out because we were gonna put some fancy NASCAR GM/Chrysler conversion in there for the Cortex setup before we decided to build our own Cortex A Arms. Be a good idea for new ones any way.

Posted by: CJ-TA May 21 2011, 05:32 AM

I might need that pro stop rotor...

I've been out for awhile.. I take it that there Steve (?) isn't making them any more? Who's/whats Coleman?

Posted by: rmackintosh May 21 2011, 04:05 PM

I am not sure, but I don't think Steve is still making them. All the stuff is Coleman--came in Coleman packaging when it was shipped to me. So you can have Coleman duplicate the rotor there for replacements/spares.

Posted by: Metlegleo May 23 2011, 06:18 AM

I'm interested in getting the rotor for the the prostops. If CJ-TA wants, we could work something out about getting Coleman to make some new ones. Let me know, paypal ready to go.
Mark
metlegleo@aol.com

Posted by: rmackintosh May 23 2011, 05:40 PM

I sent him a PM. If I don't hear back from him by tomorrow, I will put you at the front of the line.

Thanks!

Posted by: CJ-TA May 23 2011, 05:45 PM

Replied.

Metlegleo, I'm up on working to get these made for myself, you, and whoever else wants a set. I'll reach out to Coleman when I get them from Randy..

Posted by: supermac May 23 2011, 05:52 PM

Hey Randy, I would like the bump steer setup if you still have it.
PM sent
Thanks
Cody

Posted by: 1qwikbird May 31 2011, 09:18 PM

Randy,

Stick arrived today.

Thanks
Chris

Posted by: rmackintosh May 31 2011, 10:22 PM

Great! Enjoy!

Posted by: 01badz28 Jun 1 2011, 01:28 PM

Got the A arms yesterday, thanks. Bump for a great seller!

Posted by: rmackintosh Jun 8 2011, 04:05 AM

OK, a few items left....help fund the NEXT Mackintosh Motorsports race car....hehe.

New prices and I will likely put up my Speedway Engineering Ford 9" soon, if I get another car that does not need it. The axle tubes are SLIGHTLY bent, could be easily straightened, and I will confirm the Mark Williams aluminum center section and axles are perfect before the sale.

Posted by: Jae Jun 15 2011, 02:59 AM

Randy, do you have any decent fuel injectors you want to sell? I am looking for a matched set that can shoot 45+ #'s per hour for my LT1 stroker.

Posted by: rmackintosh Jun 15 2011, 03:40 AM

Sorry, pretty sure I sold all my LT1 stuff...but for a REALLY NICE short block.....last year.

Anybody want a nice 383 short block that need a refresh....let me know.

Posted by: rmackintosh Jun 17 2011, 03:21 PM

Updated main post....

Posted by: Chris Ronson Jr Jun 19 2011, 05:00 AM

PM sent Randy!