 Moving Sale!, mostly thirdgen stuff |
|
|||||||||
  |
 Oct 14 2016, 02:04 AM
Post
#1
|
|
|
Experienced Member  Group: Advanced Members Posts: 2,277 Joined: 4-May 04 From: Kenvil, NJ Member No.: 331  |
Apparently it's time to start selling off a bunch of the stuff I've been hanging on to so here's a list. Everything is best offer, shipping will be from the North Jersey area.
Set of 315/30-18 A6 Hoosiers, 4313 build date 3rd gen Hotchkis springs Alston subframe connectors Two sets of TPI parts 1 set '88 and older the other is '89 and newer. The newer set must be cleaned thoroughly since it was on the motor when it blew up, tiny chunks of piston went EVERYWHERE, from the air filter to out the exhaust. Intake track for TPI with air filter on the passenger side, Firebird style. 24 lb blue top injectors small block balancer serpentine belt set up 305 with roller cam distributor MAF computer with chip socket 4th gen 10 bolt rear (modified for lower panhard bar and screw jacks) 3rd gen Australian 9 bolt Cast iron rear calipers (lol, I should trash these!) 3rd gen heater core Gray interior panels (everything but door panels) black TA ground effects orange Firebird driver door and formula hood white Firebird fenders third gen wheels (everything with proper offsets): 1 set of Formula 16x8 1 set of the typical mid '80 Pontiac design (same look found on Fieros and Grand Ams etc.) 16x8 1 set of circle racing light weight stamped aluminum wheels 16x9.5 3rd gen gas tank (no pick up or pump) 4th gen metal gas tank (no pick up or pump) 3rd gen front impact support (bumper and egg crate thing) One 245/50-16 Cooper tire! (something else I should dump) 10 bold aluminum diff cover (not sure what brand, but will find out) small block 1.6 roller tipped rockers, screw in studs, and poly locks black with red chevy bow tie timing chain cover TPI corvette valve covers Summit/Jegs mini starter black front and rear firebird (base and formula) bumper covers I'm sure there is more I'll find while sorting through all this. Please ask for pictures! This post has been edited by slowTA: Oct 14 2016, 02:12 AM |
 |
 
|
|
Oct 14 2016, 01:29 PM
Post
#2
|
|
|
Veteran Member Group: Advanced Members Posts: 3,794 Joined: 3-July 04 From: Pearland, Texas Member No.: 385 |
Are those SFCs bolt in or weld in? I might be interested in them for our 92.
|
|
|
|
|
Oct 14 2016, 10:51 PM
Post
#3
|
|
|
Experienced Member Group: Advanced Members Posts: 2,277 Joined: 4-May 04 From: Kenvil, NJ Member No.: 331 |
|
|
|
|
|
Oct 16 2016, 06:46 AM
Post
#4
|
|
|
Advanced Member Group: Advanced Members Posts: 592 Joined: 16-October 06 From: Logan, UT Member No.: 1,416 |
Part # / Price on Summit/Jegs mini starter
~DaVe |
|
|
|
|
Oct 17 2016, 02:40 AM
Post
#5
|
|
|
Experienced Member Group: Advanced Members Posts: 2,277 Joined: 4-May 04 From: Kenvil, NJ Member No.: 331 |
Not sure of the part number, but here are 2 pics. Hardware is included but I don't have the shims.
https://goo.gl/photos/7qdfxkGLnCyZmb2D9 https://goo.gl/photos/7aFxExquc9usUyWcA Fyi, there is a jumper installed for use with a remote solenoid, it has to come off if you use factory wiring. $40 plus shipping? This post has been edited by slowTA: Oct 17 2016, 02:40 AM |
|
|
|
|
Oct 17 2016, 02:42 AM
Post
#6
|
|
|
Experienced Member Group: Advanced Members Posts: 2,277 Joined: 4-May 04 From: Kenvil, NJ Member No.: 331 |
The subframe connectors and springs are sold.
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 19th April 2024 - 01:39 PM |