2000 Pontiac Formula-HT-Supercharged-M6-Low Miles

I've been thinking about this for some time. But, I think it's time again to try and sell my 2000 Pontiac Formula. I bought this car about 6 years ago with most of the Horsepower mods already done to it, but I've since added a few items to the car. This car is quite honest a blast to drive, but because of my job I never get to drive it. I'm gone almost all of the summer, so my time to drive the car is very limited in a snow belt state. I bought the car with 48000 miles on it, but in the past 3 years I've driven it about 300 miles. It starts every time I crank the key without hesitation. I've also gotten 27 mpg while doing mostly highway driving a couple years back.

This last winter I added a few more items....reason why...it was broke into one night. The guys took off with all of my stereo/gauges/and a few other items. Luckly, they didn't trash the car while they did it and didn't cut too many wires. I have since replaced or fixed all of the damage except resoldering the ABS wiring harness. That was the only thing that I haven't fixed, because I was planning on just scraping it anyways. Also, there's no tint on the driver side glass, since they used that as a way to enter the car.

Only other issue with the car if you call it an issue is the A/C doesn't work. I live in MN, and never used it, so I never really cared enough to replace it, and was very close to removing it, but thought I'd keep it on if I ever sold the car or wanted to refill it with refrigerant.

If you have any questions regarding the car, please just PM me, and I'll answer them for you.

Info on the car:
2000 Pontiac Formula
Black
M6
Hardtop
Price: $14,000
Miles: 55,500


Engine:
TPiS LT Headers and Y-Pipe
Comp Cams 918 Spring
Vortech Blower with Aftercooler....about 9psi
B-Kool Radiator
Power Steering Cooler
Borla Catback
Ported Stock TB
38# Injectors
Racetronics 255 Fuel System with MSD Boost pump
Airaid UBI Cold Air Intake

Suspension:
Koni Adj. Shocks front and rear(Fronts have about 20K on them, rears only about 300 miles)
Eibach Pro-Kit-Rear springs have a urethane isolator..lowers another 3/4"
Global West LCAs with BMR Relocation Brackets...welded in
Double Diamond SFCs
BMR Adj. Torque Arm
35mm Sway Bar-Solid
22mm Sway Bar-Strano...Hallow
Fays2 Watts Link

Transmission-Rear:
Upgraded Hydraulics(02 Master)
Spec II Clutch w/Billet Alum. Flywheel
Pro 5.0 Shifter Cut 1" with C5 Shift Knob
Tranny was rebuilt-All gears replaced with upgraded/newer T56 gears-3-4 steel shift fork-Billet Shift struts Ect...(1500 miles ago)
3.73 Motive gears with Eaton Trutrac Dif--TA Alum. Girdle

Electronics/Interior:
Pioneer X700S
CDT 626 6.5" Component Fronts
Bazooka 6.5" Mids
Focal P25DB 10" Sub in DoubleD Stealth Driver side box
Kenwood XR5S Amp, powers all 5 speakers
KnuKonceptz 4 Gauge Amp Kit
Stringer 5 Channel RCA Kit
Rammatt and Ensolite in key locations...IE doors, hatch, seating area.
Autometer ES Gauges-Boost/Vac, Fuel Pressure and Oil Temp
Dual Gauge pod for Pillar
AEM Eugo Wideband
Corbeau CR1 Seats----Rear seats removed
6LE Harness bar w/go-pro camera Mount
HUMount Lighted mount with Formula Script
6LE Custom Gauges with all LEDs, Camaro Bezel, and Red Needles
Redline Goods Door sills, Shift and E-Brake Boot in Faux Alcantara and red stitching

Wheels/Brakes:
18x10.5" Thick Spoke C5-Black with machined lip
Hankook 285/35/18 V12 Evo for Front
Hankook 315/30/18 Ventus RS-2 for rear
C5 Calipers on front and rear, with C5 sized Rotor
Hawk HPS Pads up front
Ceramics on rear


I may be missing a few things. But, that's what I can remember for now. Car made 475/450 on the dyno a couple years back.

I'm currently on the road working, and will be back in 4 weeks. I'm putting this up now, in case someone is interested and needs to get funds together. I'm not ready to sell until I get home(First weekend of Aug). I will also have to install the seats back into the car as well as the center console. Otherwise it's ready to roll down the street.

Here are a few pictures:
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/00%20Formula/P1000664.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/00%20Formula/P1000668.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/00%20Formula/P1000675.jpg)

This picture shows the old Kenwood that was stolen last Summer
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/00%20Formula/P1000710.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/00%20Formula/P1000729.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/00%20Formula/UBIintake2.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/00%20Formula/293541_4695501317885_2052406765_n_zps25154fc7.jpg)

6LE Harness Bar and Camera Mount
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/00%20Formula/photo2_zpsb7beab51.jpg)

Dyno Sheet when I first got it. Might have a couple more HP....has a much better CAI.
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/00%20Formula/dynoformula.jpg)

Please send me a message with any questions. If I think of anything I'll add to the list. Thank you for any interest. I also have more pictures if needed.

Right now I'm not interested in any trades, as I just don't have time for anything else.

Sub Thump Passenger Side 10" Box

OK, I know this isn't the best place for this item, but I thought I might as well give it a try. We all still like music when we're not tracking our cars, right? (IMG:http://www.frrax.com/rrforum/style_emoticons/default/smile.gif)

I have a passenger side sub thump box for sale. It's in great condition, with just a few screws to hold the box into place, once installed. I have have the hardware screws used to fix the sub into place on the box. It has one nick in the upper part of the box because it rubbed against a piece of metal that holds a interior trim piece in place, as shown in the picture. I would like to get $80.00 shipped for the box to anyone in the lower 48. PM with any questions.

Pictures:
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/DSC05802.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/DSC05803.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/DSC05804.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/DSC05805.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/DSC05808.jpg)

Thanks guys.

C5 Wagon Wheels FS-Track Wheels

I have a set of four 18x9.5" wheels that I was going to use for track wheels, but decided that I'll just use the wheels I have on the car, since I rarely race the car. The wheels are in great shape, there are some nicks here and there, but structurally they're great. I have noted each issue with posted notes. I would like pick up, but I have these wheels in boxes and are ready to ship. IMO, the shipping is almost as much as the wheels, which is why I'd like a pick up sale. But, I know that can't always happen. So, I will do $250 shipped to anyone in the lower 48. Thanks

Link to pictures.

C5 Wheel Pictures

Adjustable Rod Ended PHR

I have a adjustable PHR for sale. It's never been "used" on a car, but has been installed to check for correct fitment. It's QA1 rod ended and fully adjustable. Just for the hell of it, the Jim Hall from TPiS made this PHR. Just throwing that out there, since most know of TPiS. So, you know this isn't just some random dude that made the PHR. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/smile.gif)

Price: $65 Shipped.

(IMG:http://i354.photobucket.com/albums/r409/black_Z28/doubleadj1.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/doubleadj2.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/doubleadj3.jpg)
(IMG:http://i354.photobucket.com/albums/r409/black_Z28/doubleadj4.jpg)

PM with any questions.

**PDE 2008 - Register Now!**

We’re pleased to announce that registration for the 2008 Performance Driving Experience (PDE) is now open! We’re confident our seventh annual event will be our best ever. For 2008, we’re offering a two-day track event for less than the average cost of most one-day events. The cheaper rates should make it more affordable than ever for enthusiasts to get out on the track to experience the thrill and excitement of high performance driving.

Please visit the official PDE website at www.mnfbody-pde.com to register. Space is limited, so register now!

What: 2008 Performance Driving Experience (PDE)
When: Saturday and Sunday, May 10-11 2008
Where: Mid America Motorplex – Council Bluffs, IA
Pricing:
MN F-Body Club Members:
- One Day (Saturday or Sunday): $150
- Two Days (Saturday and Sunday): $225

Non-Club Members:
- One Day (Saturday or Sunday): $165
- Two Days (Saturday and Sunday): $245

We’re looking forward to another great event and can’t wait to see all of you on the track May 10-11 for the 2008 Performance Driving Experience.

If you have any questions, please feel free to send a PM to LT1Powered85Z (Eric Anderson) or email him at emanderson @ gmail.com.

Regards,

MNFBC Administration

More information located at link below:
Link

Videos:
(IMG:http://i135.photobucket.com/albums/q153/LT1Powered85Z/StreetThunderLiveVideos/th_STLivePDE2006-1.jpg)
(IMG:http://i135.photobucket.com/albums/q153/LT1Powered85Z/StreetThunderLiveVideos/th_STLivePDE2006-2.jpg)