 putting 10" corvettte rim over LS1 caliper |
|
|||||||||
  |
 Dec 9 2004, 12:06 AM
Post
#1
|
|
|
Member  Group: Advanced Members Posts: 143 Joined: 4-January 04 From: Sarnia Member No.: 97  |
Anyone done it?
What sort of spacer is needed? This is an older style 16 x 10 Corvette rim, BTW |
 |
 
|
|
Dec 9 2004, 08:02 AM
Post
#2
|
|
|
Advanced Member Group: Advanced Members Posts: 495 Joined: 24-December 03 Member No.: 28 |
What Corvette wheels were 16x10??? I know early 16" C4 rims were 8.5" rims, I believe only 1 or 2 styles, then they moved up to 17x9.5" wheels, in 3 styles, but I don't recall any stock C4 wheels being 16x10? I am assuming you are talking about some stock C4 wheels, correct?
|
|
|
|
|
Dec 9 2004, 11:57 AM
Post
#3
|
|
|
Seeking round tuits Group: Advanced Members Posts: 5,522 Joined: 24-December 03 From: Kentucky Member No.: 33 |
I think 16x9.5 was used at one end, at least in an option package.
FWIW, my 16x10 CCW's have a 1/4" spacer bolted to the back of the hub. The effective offset with the spacer is about 39~40mm. |
|
|
|
|
Dec 9 2004, 01:45 PM
Post
#4
|
|
|
Member Group: Advanced Members Posts: 143 Joined: 4-January 04 From: Sarnia Member No.: 97 |
Ding Ding! I think we have the winner here.
Apparently there is some discussion as to whether or not these rims are 9.5 or 10 inch. I think they come off an early 4'th gen. Sounds like 1/4 inch will work. Thanks guys! They may not be pretty but I think they will make nice track wheels. |
|
|
|
|
Dec 9 2004, 08:32 PM
Post
#5
|
|
|
Advanced Member Group: Advanced Members Posts: 410 Joined: 24-December 03 From: Kissimmee/Orlando, FL Member No.: 25 |
A guy in our club was running them on his 02' SS without any spacers that I know of. It wouldn't hurt to check (IMG:http://www.frrax.com/rrforum/style_emoticons/default/smile.gif)
|
|
|
|
|
Dec 10 2004, 01:53 AM
Post
#6
|
|
|
Seeking round tuits Group: Advanced Members Posts: 5,522 Joined: 24-December 03 From: Kentucky Member No.: 33 |
QUOTE (JonV @ Dec 9 2004, 08:45 AM) Ding Ding! I think we have the winner here. Apparently there is some discussion as to whether or not these rims are 9.5 or 10 inch. I think they come off an early 4'th gen. Sounds like 1/4 inch will work. Thanks guys! They may not be pretty but I think they will make nice track wheels. I'm not sure how close the dimensions are between my CCW wheels and the Vette wheels. The following measurements are the net measurements with bolted-in spacer. back spacing = 7.125" total width = 11.125" offset = 1.56" (39.6mm) I don't know whether that means you need a spacer with the real Vette rims or not. If the offset is 38mm, you may not need any spacer. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 27th April 2024 - 09:45 PM |