Home made brake cooling ducts - F-Body Road Racing and Autocross Forums

2002 Camaro SS. Does anyone have a good idea and source of parts with which to fabricate some brake cooling ducts? I am looking for stuff you could fabricate or pick up from places like Home depot or Lowes (if possible). Something that is functional and can be done cleanly and affordably. I planned on going thru the openings in the grill (drill out the foam) and run flex tubing from there to the wheel well (cut a hole in the liner) and shoot the air to the rotor. My 295's fill up the wheel well pretty well so positioning will be a little tricky.

Any thoughts?

pharmd View Member Profile	Jun 30 2013, 07:57 PM Post #1
Member Group: Advanced Members Posts: 182 Joined: 27-August 08 Member No.: 2,284	2002 Camaro SS. Does anyone have a good idea and source of parts with which to fabricate some brake cooling ducts? I am looking for stuff you could fabricate or pick up from places like Home depot or Lowes (if possible). Something that is functional and can be done cleanly and affordably. I planned on going thru the openings in the grill (drill out the foam) and run flex tubing from there to the wheel well (cut a hole in the liner) and shoot the air to the rotor. My 295's fill up the wheel well pretty well so positioning will be a little tricky. Any thoughts?