IPB

Welcome Guest ( Log In | Register )

Unbalanced EngineeringHotpart.comBlaine Fabrication.comSolo PerformanceUMI Performance
 
Reply to this topicStart new topic
> Small block 350 shortblock and other parts
trackbird
post Jun 3 2018, 03:11 AM
Post #1


FRRAX Owner/Admin
********

Group: Admin
Posts: 15,393
Joined: 13-February 04
From: Ohio
Member No.: 196



It's getting "serious" now. I'd really like to find a new home for this stuff, particularly the short block.

OEM PS cooler from 2002 Camaro. It worked great and had no leaks when I removed it. These are known to leak on occasion, I replaced mine as a "while I was in there" thing, but if you want a spare, this was a good spare when removed.

$10 plus freight


Chevy 350 shortblock:

Splayed main caps .020 over short block (350 Chevy with 1 piece rear main seal). Billet 2 bolt front cap (GMPP), Milodon splayed main caps for the center 3 main caps. Zero decked with deck plugs. ZZ3 factory GM forged crank. Lunati street race rods (5.7" rods with floating pins). Keith Black Signature Series 12cc dished pistons with Speed Pro plasma moly rings (1800 miles on the rings and bottom end). The cam is a 220/230 .510/.510 lift roller with Comp Cams R roller lifters. Adjustable double roller timing chain (this is a factory roller block). Right now it has a Canton 7 quart 5 trap door road race oil pan for a C4 Corvette, Melling M55HV pump, Clevite main, rod and cam bearings (700 miles ago). Pics on request. Local pickup only.

Includes spare oil filters:
Small block Chevy oil filters. 2 Mobile 1 filters (PF 454 equivalent) and 3 AC Delco filters (PF 454). New in the box, fit 1991 Corvette (standard small block Chevy filters).

$1250 OBO (Somebody buy this, the oil pan was $400 with the pick up)


I have a set of 16 of the (old style) 1.52 ratio Comp Cams Pro Magnum chromoly roller rockers that fit 7/16 studs for small block Chevy engines. They have approximately 1600 miles on them.

$195 plus freight


Stock 2002 Z28 front swaybar.

$10 Local pickup only


AC Delco stock replacement power steering pressure hose (pump to rack). Still sealed in the bag.

$12 plus freight


Stock LS1 harmonic balancer from a 2002 Z28.

$10 plus freight


All parts located on the west side of Columbus, OH.


trackbird (at) gmail dot com
Go to the top of the page
 
+Quote Post
KCG
post Jun 4 2018, 04:43 PM
Post #2


Member
*

Group: Advanced Members
Posts: 79
Joined: 2-August 13
From: Maryland
Member No.: 223,768



I'll take the PS hose and the balancer if shipping isn't too crazy to 21918
Go to the top of the page
 
+Quote Post
trackbird
post Jun 4 2018, 08:47 PM
Post #3


FRRAX Owner/Admin
********

Group: Admin
Posts: 15,393
Joined: 13-February 04
From: Ohio
Member No.: 196



QUOTE (KCG @ Jun 4 2018, 12:43 PM) *
I'll take the PS hose and the balancer if shipping isn't too crazy to 21918


Due to weight, I'm guessing it will be around $18. I can box it up and run by the post office and have you paypal me the total with actual freight. Let me get it packed up.
Go to the top of the page
 
+Quote Post
KCG
post Jun 5 2018, 09:50 AM
Post #4


Member
*

Group: Advanced Members
Posts: 79
Joined: 2-August 13
From: Maryland
Member No.: 223,768



QUOTE (trackbird @ Jun 4 2018, 04:47 PM) *
QUOTE (KCG @ Jun 4 2018, 12:43 PM) *
I'll take the PS hose and the balancer if shipping isn't too crazy to 21918


Due to weight, I'm guessing it will be around $18. I can box it up and run by the post office and have you paypal me the total with actual freight. Let me get it packed up.


Sounds good. Includes a couple silver FRAXX stickers ???
Go to the top of the page
 
+Quote Post
KCG
post Jun 13 2018, 01:27 PM
Post #5


Member
*

Group: Advanced Members
Posts: 79
Joined: 2-August 13
From: Maryland
Member No.: 223,768



bump ....
Go to the top of the page
 
+Quote Post
rocky
post Jun 13 2018, 01:41 PM
Post #6


Advanced Member
**

Group: Advanced Members
Posts: 412
Joined: 26-August 09
From: Mathews Va
Member No.: 6,032



If I was closer I would get that short block from you.
Go to the top of the page
 
+Quote Post
trackbird
post Jun 13 2018, 09:53 PM
Post #7


FRRAX Owner/Admin
********

Group: Admin
Posts: 15,393
Joined: 13-February 04
From: Ohio
Member No.: 196



QUOTE (KCG @ Jun 13 2018, 09:27 AM) *
bump ....


Sorry, father in law moved, baby sister in law moved (and we're building a house). I've been hanging TV's on walls, installing toilets and faucets and all the fun stuff and haven't had 5 minutes to sit down and box things up. I'll try to get to that ASAP.



QUOTE (rocky @ Jun 13 2018, 09:41 AM) *
If I was closer I would get that short block from you.


I wish you would... I can likely get it to the Hagerstown, MD area at some point (if that helps). Lol.
Go to the top of the page
 
+Quote Post
KCG
post Jun 14 2018, 01:12 AM
Post #8


Member
*

Group: Advanced Members
Posts: 79
Joined: 2-August 13
From: Maryland
Member No.: 223,768



QUOTE (trackbird @ Jun 13 2018, 05:53 PM) *
QUOTE (KCG @ Jun 13 2018, 09:27 AM) *
bump ....


Sorry, father in law moved, baby sister in law moved (and we're building a house). I've been hanging TV's on walls, installing toilets and faucets and all the fun stuff and haven't had 5 minutes to sit down and box things up. I'll try to get to that ASAP.




No problem. Not in a rush. Just consider them sold whenever you get the chance.
Go to the top of the page
 
+Quote Post
landstuhltaylor
post Jun 14 2018, 11:23 AM
Post #9


Advanced Member
**

Group: Advanced Members
Posts: 487
Joined: 12-January 07
Member No.: 1,587



That short block may tow well (IMG:http://www.frrax.com/rrforum/style_emoticons/default/laugh.gif)
Go to the top of the page
 
+Quote Post
rocky
post Jun 14 2018, 03:04 PM
Post #10


Advanced Member
**

Group: Advanced Members
Posts: 412
Joined: 26-August 09
From: Mathews Va
Member No.: 6,032



QUOTE (trackbird @ Jun 13 2018, 05:53 PM) *
QUOTE (KCG @ Jun 13 2018, 09:27 AM) *
bump ....


Sorry, father in law moved, baby sister in law moved (and we're building a house). I've been hanging TV's on walls, installing toilets and faucets and all the fun stuff and haven't had 5 minutes to sit down and box things up. I'll try to get to that ASAP.



QUOTE (rocky @ Jun 13 2018, 09:41 AM) *
If I was closer I would get that short block from you.


I wish you would... I can likely get it to the Hagerstown, MD area at some point (if that helps). Lol.


If I get out that way before it is gone I will let you know
Go to the top of the page
 
+Quote Post
trackbird
post Jun 14 2018, 09:05 PM
Post #11


FRRAX Owner/Admin
********

Group: Admin
Posts: 15,393
Joined: 13-February 04
From: Ohio
Member No.: 196



QUOTE (landstuhltaylor @ Jun 14 2018, 07:23 AM) *


Yea, it made torque everywhere. And it's built to last a long time.
Go to the top of the page
 
+Quote Post
KCG
post Aug 7 2018, 04:20 PM
Post #12


Member
*

Group: Advanced Members
Posts: 79
Joined: 2-August 13
From: Maryland
Member No.: 223,768



QUOTE (trackbird @ Jun 13 2018, 05:53 PM) *
QUOTE (KCG @ Jun 13 2018, 09:27 AM) *
bump ....


Sorry, father in law moved, baby sister in law moved (and we're building a house). I've been hanging TV's on walls, installing toilets and faucets and all the fun stuff and haven't had 5 minutes to sit down and box things up. I'll try to get to that ASAP.



Are you going to UMI this weekend?
Go to the top of the page
 
+Quote Post
trackbird
post Aug 8 2018, 11:05 AM
Post #13


FRRAX Owner/Admin
********

Group: Admin
Posts: 15,393
Joined: 13-February 04
From: Ohio
Member No.: 196



QUOTE (KCG @ Aug 7 2018, 12:20 PM) *
QUOTE (trackbird @ Jun 13 2018, 05:53 PM) *
QUOTE (KCG @ Jun 13 2018, 09:27 AM) *
bump ....


Sorry, father in law moved, baby sister in law moved (and we're building a house). I've been hanging TV's on walls, installing toilets and faucets and all the fun stuff and haven't had 5 minutes to sit down and box things up. I'll try to get to that ASAP.



Are you going to UMI this weekend?


I really wanted to, but my closing date on the new house is tomorrow (go figure). So I'm in the middle of a sea of boxes and will be deep in "moving hell" during the event. I had hoped to at least drive the convertible up to hang out, but I'm just not going to make it at this point. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/sad.gif)
Go to the top of the page
 
+Quote Post
KCG
post Aug 8 2018, 11:11 AM
Post #14


Member
*

Group: Advanced Members
Posts: 79
Joined: 2-August 13
From: Maryland
Member No.: 223,768



lol. Understood, such is life
Go to the top of the page
 
+Quote Post
trackbird
post Aug 8 2018, 01:11 PM
Post #15


FRRAX Owner/Admin
********

Group: Admin
Posts: 15,393
Joined: 13-February 04
From: Ohio
Member No.: 196



QUOTE (KCG @ Aug 8 2018, 07:11 AM) *
lol. Understood, such is life


Yea, I've missed the last two and keep vowing to get to the next one. I love the UMI team and this events sounds like a blast and I am really sad I can't make it this year. I had the week off for the event this year and expected the house to close a few weeks ago. That might have given me time to move and still make it up to hang out. They tried to push our closing into late July and the main office people freaked, so they moved us back into August. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/sad.gif)
Go to the top of the page
 
+Quote Post
KCG
post Aug 8 2018, 02:19 PM
Post #16


Member
*

Group: Advanced Members
Posts: 79
Joined: 2-August 13
From: Maryland
Member No.: 223,768



After last year, I scheduled the days off as soon as it was announced for this year. Ryan puts on a great event. Should be even better this year at their own track. He gave a few of us a tour a couple weeks ago. Its come a long way. Still plenty to do, but looks much better than the day he purchased. It should be fun. All the UMI crew seem like good people. Can't wait to get on track and about as excited to get back to see the shop and projects again.
Same with the shootout they do at Carlisle. Even tho it was rainy, they made the best of it. My son took his money using a competitors products but it was all good. Good people. Good times.
Go to the top of the page
 
+Quote Post
trackbird
post Aug 12 2018, 06:28 AM
Post #17


FRRAX Owner/Admin
********

Group: Admin
Posts: 15,393
Joined: 13-February 04
From: Ohio
Member No.: 196



So, how was it?

I'm in day two in the new house...so far I've installed cabinets above the washer and dryer, added some outlets, mounted a couple televisions on the wall, installed a microwave, wrapped up the alarm install (not really finished, but fully operational now), sealed the concrete in the garage, installed multiple ceiling fans (and my dad was in town and did a fan and some lights in the extra bedrooms) and I forget what else.

I still have to put up towel bars and such in the bathrooms, I need to get my cameras up and running, install some faucets and a new sink and cabinet in the half bath to replace the pedestal sink (as well as new fixtures, towel bars etc). I'm sure there's more, I just forget what it is (running in some 240v outlets for welders and such).
Go to the top of the page
 
+Quote Post
KCG
post Aug 15 2018, 04:32 PM
Post #18


Member
*

Group: Advanced Members
Posts: 79
Joined: 2-August 13
From: Maryland
Member No.: 223,768



It was a good time. About 4hrs on the road for us each way. Showed up Thursday. Did a course walk with Sam S. & Brian Finch. Checked out the competition and ofcourse the host hotel parking lot party afterwards. Racing all day Friday (lunch provided) then off to UMI for BBQ and a shop tour. Racing again Saturday (lunch again) then car show open to the public with food, drink & live music. Ryan and crew had everything covered. The course was great. Thru the freshly paved infield, on & off the banked oval, everything else he provides for the weekend makes this a great EVENT, not just a race.
Everyone was already asking him "whats next years date?"
My son took 3rd place in his 2nd gen in "mid-year" class out of 20 cars.
I was 13th out of 26 in my '95 for "late-model" class. I felt pretty good about it since I'm a novice at this.

This post has been edited by KCG: Aug 15 2018, 04:43 PM
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 28th March 2024 - 09:40 AM