FS: Canton Road Race Oil Pan - F-Body Road Racing and Autocross Forums

PN 15-244
I ran this pan in my 3rd Gen RR car and this pan also worked great in My 1988 C-4 Road race car:
It is for a 2 piece rear seal pre 1986 SBC.

FEATURES: 3 Trap door baffles, removable one way screen windage tray with built in crank scraper, oil temp fitting, magnetic drain plug and, 20mm fitting for low oil warning sender.

SIZE: 7-1/2" Deep, 12" wide, 8-1/4" long sump has a 6 qt. system capacity.

It has about 2000 miles on it.
About 2 seasons of practice and racing.

Pics at: http://community.webshots.com/album/151818328VMUEos

$200 + shipping

email to dregsz@yahoo....com

Thanks
Evan

dregsz View Member Profile	Jan 16 2005, 01:09 AM Post #1
Member Group: Advanced Members Posts: 56 Joined: 5-January 05 From: Gig Harbor, WA Member No.: 592	PN 15-244 I ran this pan in my 3rd Gen RR car and this pan also worked great in My 1988 C-4 Road race car: It is for a 2 piece rear seal pre 1986 SBC. FEATURES: 3 Trap door baffles, removable one way screen windage tray with built in crank scraper, oil temp fitting, magnetic drain plug and, 20mm fitting for low oil warning sender. SIZE: 7-1/2" Deep, 12" wide, 8-1/4" long sump has a 6 qt. system capacity. It has about 2000 miles on it. About 2 seasons of practice and racing. Pics at: http://community.webshots.com/album/151818328VMUEos $200 + shipping email to dregsz@yahoo....com Thanks Evan