 pushrod actuated suspension |
|
|||||||||
  |
 Apr 10 2004, 10:33 PM
Post
#1
|
|
|
Dry Sponge  Group: Advanced Members Posts: 169 Joined: 1-March 04 From: Houston, Tx. Member No.: 259  |
what is it about this sort of suspension that deems itself worthy of the carrera gt and enzo and performance automobiles of the like? anyone know what it is that makes it so much better than a direct coil over suspension...?
|
 |
 
|
|
Apr 10 2004, 10:50 PM
Post
#2
|
|
|
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 |
Weight. As far as I can tell, those pushrods are much lighter than shocks and eliminate unsprung weight. Also, since the shock is mounted inboard, it is easy to use remote reservoirs and such. I'm sure there is more too it than this, but that is my "basic" answer. I'm sure there are things I missed.
|
|
|
|
|
Apr 10 2004, 10:52 PM
Post
#3
|
|
|
Mr. 3rd Place Group: Advanced Members Posts: 537 Joined: 24-December 03 From: Rindge, NH Member No.: 32 |
Every time I recall seeing a push rod acutated suspension it was packed into a tight space.
Look at how much vertical space a front strut suspension takes up. Lots. A push rod suspension can be packed into a much tighter space, minimizing frontal area. I'd guess one could run a more reasonable spring with more travel on a pushrod with a small front end than one with a more traditional outboard mounted coil over in the same small front end. Push rod susp. also works well on open wheel cars keeping springs/shocks inside the narrow nose and out of the air stream. Check out a FF C MOD at an autocross sometime. That's my guess... |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 16th June 2025 - 12:20 PM |