Baer/Alcon 13.5x1.25" brakes (complete)

Baer/Alcon 4 piston brakes (front). 13.5 x 1.25" rotors. Comes complete with EVERYTHING you need....including the spindles so the system is essentially a direct bolt in. Calipers, rotors (hats anodized blue), pads, adapter brackets, hardware, spindles, etc... THese will work on an LT1 or LS1 car. This setup was $2500 new.

$1100 shipped
or
$875 shipped w/LS1 front brake setup in return

jhsformula@aol.com

95 Formula LS1 (race/street)

I need to reduce some debt so I wanted to see if there was any interest in this:

1995 Firebird Formula
-black
-t-tops
-custom 6pt. chromoly cage (TIG welded)
-custom chromoly subframe connectors
-custom chromoly crossbrace with chromoly adjustable torque arm
-PA tubular K-frame (mild steel)
-PA tubular A-arms (mild steel)
-2004 6.0L LS1 shortblock, freshed 4000 miles ago with new rings/bearings
-TEA stage 1.5 5.3L heads w/hand finishing
-222/224 cam on a 115 LSA (idles like stock)
-Comp cams 987 valvesprings
-Comp cams Ti retainers
-LS1 intake manifold
-Z06 injectors
-Z06 clutch
-2001 T56 tranny
-4.10 gears
-custom 4-core radiator (HUGE!)
-hooker longtubes w/Y-pipe
-adj PHB
-boxed LCA's
-BAER/ALCON 4-piston 13.5" front brakes w/1.25" wide rotors (the good brakes) (IMG:http://www.frrax.com/rrforum/style_emoticons/default/smile.gif)

I am probably forgetting a few things. The car runs/drives like stock and is making around 400rwhp. The body is in good shape, never wrecked. Clean title. The front and rear bumper covers could use paint, but for a track car it is more than nice. Currently it is getting ~24mpg on the highway. The cage/subframes/torque arm is about the nicest custom work I have seen....the bill alone on that was $3000. The AC is removed, but can be re-installed very easily. Heater box is still in the car, and there is NOTHING removed. Full interior, CD, speakers, heater/defrost, everything is still in place and working great.

I will also sell the car as a roller with everything listed minus engine/tranny/wiring/PCM

$9500 for the car complete
$4000 for the roller

jhsformula@aol.com

***will have pictures available soon

any interest? (95 Z28 rolling chassis)

1995 Z28 rolling chassis, M6, t-tops, green, cloth interior, never modified, no power options, strait, paint is very nice, clean NY title.

Would make a perfect track car.

The car is located 25 minutes from Watkins Glen International.

$1900

jhsformula@aol.com
Thanks, Jason

93 Formula

no longer available, thanks

1995 Formula race car (rolling chassis)

1995 Firebird Formula
-Red, graphite (dk grey) cloth (except has tan cloth seats)
-T-top
-new Speed Inc. lightweight carpet
-BMR weld in subframe connectors
-Wolfe weld in 6pt roll cage

The car is only a rolling chassis. All heating/airbags have been removed. The paint in in good condition, car has never been wrecked and has a clean title. All race suspension parts have been taken out so it just has a stock rear end with stock shocks/springs. It is a 6spd car. Interior is in VERY nice condition, carpet is brand new, panels are not all scratched up. The roll cage is painted black and looks good. Windsheild wipers/motors have been removed. All glass is in the car, power windows and locks work well.

Very nice for a race car project. Will have pictures to post of it later tonight or tomorrow.

Looking to get around $1200 for the car. Car is located in about 30 minutes from WGI (Watkins Glen International).

jhsformula@aol.com
Thanks, Jason