I've got a pair of TPI cooling fans from my 1992 Z28. I'm replacing them with a single fan. They don't really fit properly with my new radiator (I can only run one fan, the other hits the tank and the one I can run is almost 1" from the radiator, so it's not cooling very effectively for my use) and I'm replacing them with something else. This is just for the pair of fans (I'll see if I still need the lower mount and I've already modified the upper mount).

$50 plus freight (or pick up at nationals)

Spal is supposed to make a good 2 fan setup with a nice shroud.

I bought a Flex-a-lite Black Magic, but I got the new one with the curved blades. It has a small shroud and is rated at 3,000 CFM. I'm going to have to modify the radiator area to get it to fit, but the other fans were too far from the radiator so I'm pulling them off.

Ok, both fans and the lower mount are included (I didn't need it).

Just source an upper mount and your on your way.