Hello,
I am looking for some advice regarding the proper length for front sway bar end links on a 02 Camaro SS. I broke both bolts on the stock front sway bar end links, so I purchased a set of Energy Suspension, polyurethane end links. Right after ordering the ones listed for an 02 Camaro, I noticed their website states to "measure the length of OEM spacer sleeve to order the correct length". I measured the stock spacer sleeve and it is approx. 2 5/16". Here is the problem, the universal on I received for the 02 Camaro has a 2 7/8" sleeve. So this one is 9/16" longer than the original one. Should I just use this new universal one or order a 2 3/8" one from energy suspension. My car has dual uses: drag strip and SCCA Solo events. I want the car to handle better and I am afraid that with the longer end links that it may reduce the effectiveness of the sway bar.

So anyone have any recommendations?

Thank you.

Just cut the sleave to match the length of the stock one

I cut mine to length as well, no problems.

After shortening the sleeves, If the threads bottom before the nuts are tight then you'll need shorter bolts, too. The ES bolts are 3/8-16, Grade8. A hardware store will have them.