I am selling my 1999 Camaro to finish my other project.
Black Hardtop, Roll up windows.
LS1 with LS6 cam and intake, ported throttle body,ported and polished heads, Hooker headers, true duals,ASP underdrive crank pulley, 40# injectors, dyno tuned approx 400 RWHP and 400 RWTQ
Spec stage III clutch with aluminum flywheel
6 speed with 3.73 gears, Torsen T2R
GM performance lightweight aluminum driveshaft
Front Tubular adjustable upper and lower front control arms, bump steer kit, Strano sway bar
Rear Tubular adjustable lower control arms, Fey 2 Watts link, Strano sway bars
Single adjustable Koni's front and rear
Tubular Adjustable torque arm
Slotted rotors, Hawk pads, stainless brake lines
Four point harness bar, two five point harness
Corbeau seats
Manual fan switch
CCW 18 x 11 1/2 front, 17 x 12 1/2 rear
Hoosier A6 315 x 18 front, 335 x 17 rear
Ground Control adjustable spring perches front and rear.
VFN lightweight fiberglass pin on hood
Approx. 3,150 lbs.
Car is currently running in CP but I have all the parts including AC if someone wants to run it in SM, It could go back to ESP but it would need a rear seat and a few other items.
This car has the potential to be the quickest in most regions with the right driver.
Since I put new tires on it two events back it has been 2nd in raw times at the last two events.
www.trscca.com event results to see. CP91 Pro Class
At track days it is consistently one of the fastest cars.
I am asking $9,500.00 with the CCW wheels and Hoosiers with two autox events on them
Without the CCW's and Hoosiers $7,500.00
Any questions call me 615 542-0707 Richard
Email for pictures driver91@comcast.net
Full Version: For Sale 1999 Camaro Autox and Track Day
Price Lowered $6,500.00 without the CCW's and Hoosiers
QUOTE (driver91 @ May 5 2010, 06:37 PM) 
I am selling my 1999 Camaro to finish my other project.
Black Hardtop, Roll up windows.
LS1 with LS6 cam and intake, ported throttle body,ported and polished heads, Hooker headers, true duals,ASP underdrive crank pulley, 40# injectors, dyno tuned approx 400 RWHP and 400 RWTQ
Spec stage III clutch with aluminum flywheel
6 speed with 3.73 gears, Torsen T2R
GM performance lightweight aluminum driveshaft
Front Tubular adjustable upper and lower front control arms, bump steer kit, Strano sway bar
Rear Tubular adjustable lower control arms, Fey 2 Watts link, Strano sway bars
Single adjustable Koni's front and rear
Tubular Adjustable torque arm
Slotted rotors, Hawk pads, stainless brake lines
Four point harness bar, two five point harness
Corbeau seats
Manual fan switch
CCW 18 x 11 1/2 front, 17 x 12 1/2 rear
Hoosier A6 315 x 18 front, 335 x 17 rear
Ground Control adjustable spring perches front and rear.
VFN lightweight fiberglass pin on hood
Approx. 3,150 lbs.
Car is currently running in CP but I have all the parts including AC if someone wants to run it in SM, It could go back to ESP but it would need a rear seat and a few other items.
This car has the potential to be the quickest in most regions with the right driver.
Since I put new tires on it two events back it has been 2nd in raw times at the last two events.
www.trscca.com event results to see. CP91 Pro Class
At track days it is consistently one of the fastest cars.
I am asking $9,500.00 with the CCW wheels and Hoosiers with two autox events on them
Without the CCW's and Hoosiers $7,500.00
Any questions call me 615 542-0707 Richard
Email for pictures driver91@comcast.net
Black Hardtop, Roll up windows.
LS1 with LS6 cam and intake, ported throttle body,ported and polished heads, Hooker headers, true duals,ASP underdrive crank pulley, 40# injectors, dyno tuned approx 400 RWHP and 400 RWTQ
Spec stage III clutch with aluminum flywheel
6 speed with 3.73 gears, Torsen T2R
GM performance lightweight aluminum driveshaft
Front Tubular adjustable upper and lower front control arms, bump steer kit, Strano sway bar
Rear Tubular adjustable lower control arms, Fey 2 Watts link, Strano sway bars
Single adjustable Koni's front and rear
Tubular Adjustable torque arm
Slotted rotors, Hawk pads, stainless brake lines
Four point harness bar, two five point harness
Corbeau seats
Manual fan switch
CCW 18 x 11 1/2 front, 17 x 12 1/2 rear
Hoosier A6 315 x 18 front, 335 x 17 rear
Ground Control adjustable spring perches front and rear.
VFN lightweight fiberglass pin on hood
Approx. 3,150 lbs.
Car is currently running in CP but I have all the parts including AC if someone wants to run it in SM, It could go back to ESP but it would need a rear seat and a few other items.
This car has the potential to be the quickest in most regions with the right driver.
Since I put new tires on it two events back it has been 2nd in raw times at the last two events.
www.trscca.com event results to see. CP91 Pro Class
At track days it is consistently one of the fastest cars.
I am asking $9,500.00 with the CCW wheels and Hoosiers with two autox events on them
Without the CCW's and Hoosiers $7,500.00
Any questions call me 615 542-0707 Richard
Email for pictures driver91@comcast.net
Here are a few pictures of the car.
Price Lowered to $6,000.00 without CCW's And Hoosiers
Bottom price.
Will start parting out soon .
Bottom price.
Will start parting out soon .
QUOTE (driver91 @ May 24 2010, 07:56 PM)
Price Lowered $6,500.00 without the CCW's and Hoosiers
QUOTE (driver91 @ May 5 2010, 06:37 PM)
I am selling my 1999 Camaro to finish my other project.
Black Hardtop, Roll up windows.
LS1 with LS6 cam and intake, ported throttle body,ported and polished heads, Hooker headers, true duals,ASP underdrive crank pulley, 40# injectors, dyno tuned approx 400 RWHP and 400 RWTQ
Spec stage III clutch with aluminum flywheel
6 speed with 3.73 gears, Torsen T2R
GM performance lightweight aluminum driveshaft
Front Tubular adjustable upper and lower front control arms, bump steer kit, Strano sway bar
Rear Tubular adjustable lower control arms, Fey 2 Watts link, Strano sway bars
Single adjustable Koni's front and rear
Tubular Adjustable torque arm
Slotted rotors, Hawk pads, stainless brake lines
Four point harness bar, two five point harness
Corbeau seats
Manual fan switch
CCW 18 x 11 1/2 front, 17 x 12 1/2 rear
Hoosier A6 315 x 18 front, 335 x 17 rear
Ground Control adjustable spring perches front and rear.
VFN lightweight fiberglass pin on hood
Approx. 3,150 lbs.
Car is currently running in CP but I have all the parts including AC if someone wants to run it in SM, It could go back to ESP but it would need a rear seat and a few other items.
This car has the potential to be the quickest in most regions with the right driver.
Since I put new tires on it two events back it has been 2nd in raw times at the last two events.
www.trscca.com event results to see. CP91 Pro Class
At track days it is consistently one of the fastest cars.
I am asking $9,500.00 with the CCW wheels and Hoosiers with two autox events on them
Without the CCW's and Hoosiers $7,500.00
Any questions call me 615 542-0707 Richard
Email for pictures driver91@comcast.net
Black Hardtop, Roll up windows.
LS1 with LS6 cam and intake, ported throttle body,ported and polished heads, Hooker headers, true duals,ASP underdrive crank pulley, 40# injectors, dyno tuned approx 400 RWHP and 400 RWTQ
Spec stage III clutch with aluminum flywheel
6 speed with 3.73 gears, Torsen T2R
GM performance lightweight aluminum driveshaft
Front Tubular adjustable upper and lower front control arms, bump steer kit, Strano sway bar
Rear Tubular adjustable lower control arms, Fey 2 Watts link, Strano sway bars
Single adjustable Koni's front and rear
Tubular Adjustable torque arm
Slotted rotors, Hawk pads, stainless brake lines
Four point harness bar, two five point harness
Corbeau seats
Manual fan switch
CCW 18 x 11 1/2 front, 17 x 12 1/2 rear
Hoosier A6 315 x 18 front, 335 x 17 rear
Ground Control adjustable spring perches front and rear.
VFN lightweight fiberglass pin on hood
Approx. 3,150 lbs.
Car is currently running in CP but I have all the parts including AC if someone wants to run it in SM, It could go back to ESP but it would need a rear seat and a few other items.
This car has the potential to be the quickest in most regions with the right driver.
Since I put new tires on it two events back it has been 2nd in raw times at the last two events.
www.trscca.com event results to see. CP91 Pro Class
At track days it is consistently one of the fastest cars.
I am asking $9,500.00 with the CCW wheels and Hoosiers with two autox events on them
Without the CCW's and Hoosiers $7,500.00
Any questions call me 615 542-0707 Richard
Email for pictures driver91@comcast.net
If you get to the point where you want to part it, I am interested in the following:
Maybe the hood as well, depending on price.
QUOTE (driver91 @ May 5 2010, 09:37 AM)
I am selling my 1999 Camaro to finish my other project.
GM performance lightweight aluminum driveshaft
Fey 2 Watts link,
Tubular Adjustable torque arm
GM performance lightweight aluminum driveshaft
Fey 2 Watts link,
Tubular Adjustable torque arm
Maybe the hood as well, depending on price.
Are you interested in any trades?
QUOTE (ledfoot2 @ Jun 4 2010, 10:37 PM)
Are you interested in any trades?
Depends on what you have to trade.
I will listen to any offers.
Thanks
QUOTE (driver91 @ Jun 8 2010, 11:54 PM)
QUOTE (ledfoot2 @ Jun 4 2010, 10:37 PM)
Are you interested in any trades?
Depends on what you have to trade.
I will listen to any offers.
Thanks
This car has roll up windows and manual seat tracks. It was a V6 base model before I transplanted the drivetrain from the Z28.
I may be interested, e-mail sent. Thanks Greg
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.