Howdy,

edit: some pictures are at http://www.maracing.com/forsale/

Hoosier tires, all in good used condition. $50 + $25 shipping if needed/ea
4 315/30-18 R6

2.5" Coil over springs. $60/pair shipped:
7" free length -- 350, 400
8" free length -- 300, 325, 500, 550
10" free length -- 550

Email is marka at maracing dot com

Mark

I am interested in the brake kit. Pm sent

Pig-tail rear springs or....?

Howdy,



Yeah, pigtail rears.

Mark

PM sent

Let me know if the brakes are still available

Howdy,




He's asked for a shipped price, but hasn't committed. They're still available.

Mark

Is it this one? http://www.ioportracing.com/Merchant2/merc...egory_Code=IOPP

Also interested in the brake kit.

Howdy,

Camera mount has been sold.

There's been interest in the brake kit, but nobody has committed. Call it $100 to ship to the 48, as the rotors and spindles are heavy, plus I'll need to make a good box for it.

Mark

I'll take the SS rear lines and the front A-arms W/ GW. Send me a PM with total to 93312

I'll take the spoiler. Please PM me with total to 46143.

Seconds on the spoiler if it falls through.

Howdy,

Folks I'll get totals with shipping out to respondants in this thread tomorrow.

Mark

Howdy,

PM'd with shipping costs for spoiler & ss rear lines + GW lower arms.

I also have a set of Carbotech rear brake pads with lots of pad left (like 75%+), but I'm not sure of the compound. I'd guess AX6, but no guarantees. $40 shipped.

Also have a new/unused/original packaging set of Satisfied GranSport GS3 pads (GS3D749 ls1 front brakes). $85 shipped. Retail is >$200.

Mark

Howdy,

Pictures of some of the stuff are here:

http://www.maracing.com/forsale/

There's a decent # of shots of the brakes. Folks, while you'll have to wash them if you're anal, these are in great condition and are priced at about 10% of what the new version from Wilwood costs and about the same as a set of decent front pads. You will not find a cheaper way to get good front brakes on a 4th gen. I took them off the car because the hub mounting setup means they're not legal for ESP, not because I didn't like them! :-)

And yes, you'll need 17" wheels.

Mark

PM sent on LS1 Edit cable + box.

Howdy,

Ok, some stuff is sold, here's what I have left some with new prices:


Hoosier tires, all in good used condition. $80/ea or trade for z06 front A6 (295/35-17 or 275/40-17)
12 315/30-18 A6
4 315/30-18 R6

2.5" Coil over springs. $60/pair shipped:
7" free length -- 350, 400
8" free length -- 300, 325, 500, 550
10" free length -- 550

175 in-lb 10" pigtail rear springs, rusty -- $50 shipped

200 in-lb 10" pigtail rear springs, new (pink) -- $50 shipped

Wilwood front six piston brake setup, hub mounted front brakes. Includes stainless lines, pads, modified spindles, rotors in useable condition, and a spare 1/2 worn set of pads. Everything you need. -- $300 shipped

Spohn rod ended steel panhard bar, black, good rod ends -- $70 shipped

Pair Spohn rod ended steel rear lower control arms, black, good rod ends -- $100 shipped

Modified Strano rear bar. 7/8" hollow, modified to work with Helwig endlinks and be adjustable. Includes Hellwig endlinks, but not the Hellwig chassis side endlink mounting plate. $75 shipped

pair Tokico Illumina Rear shocks, no rust -- $100 shipped

Bassanni 3" cat back exhaust, including hangers, surface discoloration -- $100 pickup only

Pair of Moser (??) rear axles -- $40 shipped

3" exhaust dump & clamp, setup to bolt onto exit of stock Y pipe -- $10

Complete axle assembly #1: dropped brackets, stock 3.42 gears, stock torsen, stock axles. One ring gear bolt is supposedly stripped. $100 local pickup only.

Complete axle assembly #2: dropped brackets, modified vent, 3.73 gears. includes loose axles & torsen. $150 local pickup only.

Used Carbotech rear brake pads with lots of pad left (like 75%+), but I'm not sure of the compound. I'd guess AX6, but no guarantees. $40 shipped.

New/unused/original packaging set of Satisfied GranSport GS3 front pads (GS3D749 ls1 front brakes). $85 shipped. Retail is >$200.

======================================================

Stock Parts: Make an offer. Stupid offers accepted if you pick them up locally. If I have to ship them, I'm just as likely to throw them away vs. making $5.

16" donut spare w/tire.

pair Stock rear lower control arms

New right front caliper, no pads

Pair of used front calipers, no pads

Pair stock front lower control arms

Pair stock front upper control arms w/brackets

Stock rear swaybar (19mm?), no endlinks

Email is marka at maracing dot com

Mark

what kind of pads/rotors are needed for the brake setup. LS1 size, or C5, or something custom.

Howdy,

Pads and rotors are available from Wilwood. I assume pads are also available from the normal manufacturers.

And, not meaning to be too much of a dickhead but... I've answered what seems like one hundred questions on these Wilwood brakes. Look folks, either you want them or you don't. A similar kit from Wilwood today costs almost ten times what I'm asking for these and I set the price low to get a quick no hassle sale. Either buy them or don't, I don't care. The price I'm charging is about the same price you'd pay for one caliper or one set of brake pads, and you're getting the full kit with _everything_ you need. If you want a big brake kit, buy it. If you don't, don't.

Mark

Sent pm

Howdy,

All A6's are gone, still have the set of R6's. $300 shipped in the lower 48 for the R6's.

Mark

Howdy,

Brakes are sold.

Make offers here folks. I don't want this shit hanging around the house.

Mark

Howdy,

Panhard and modified rear sammy bar sold, both axle assemblies and rear LCAs spoken for.

Mark

Howdy,

Nobody needs a set of rear Tokicos? Or a set of new front racing pads at less than half price?

Mark

Are the rear springs stock ride height or lower? I'm interested in the 175's

Howdy,



I'm not sure what stock ride height is, but I doubt it...

These are ~11" tall with a set of stock top rubber spring isolators. I used them with GC rear adjusters somewhere like half way up and had something like a 26.5" fender lip height.

All that's from memory, but the short version is that I think the car would be awfully low unless you used GC or other adjustable perches.

Mark

I don't think they'll work for what I'm looking to do. Sorry. Back to the top. It's the least I can do.

Hey Mark,

I got the race pads today and they look good! Thanks for the fast shipping!

Justin

I got the swaybar and am more then pleased but I've got a question. What did that bracket look like for the endlinks? Would a piece of flat stock with a bolt welded to it work? I found a picture of it installed on your car but couldn't see how the rndlink was attached.

Do you have the weight jack setup to go with the rear springs or was that sold with the car?

Howdy,



Weight jack setup went with the car. Its just the standard GC rear weight jacker though, IIRC.

The chassis side piece is a Hellwig part. You might be able to just get it from them. But its a flat piece of ~1/4" steel, with counter sunk holes for tapered head allen bolts to bolt it to the chassis and a threaded (716" fine thread I believe) hole to mount up the endlink to.

I think a piece of plate with a bolt welded to it would work just fine as well.

Mark

Howdy,

Bumping this... Still have a good set of 315-18 R6's and a pair of rear Tokico Illuminas left... Someone must need these!

Mark

Complete axle assembly #2: dropped brackets, modified vent, 3.73 gears. includes loose axles & torsen. $150 local pickup only.

If you still have it let me know. Might be up by your way next weekend. And the stock front lowers? 3rd gen? Thanks man, Pat

Howdy,



I still have it, but its spoken for. The front lowers are 4th gen.

I think about all I have left are a few stock parts, plus the set of 315/xx-18 R6's and a pair of rear tokicos.

Mark

Ah.... I'm down for the stock stuff. I just have a shell again and I'm wanting to set it on the ground so I can start the chassis this winter. It's a 3rd gen. Any help is greatly appreciated. Thanks

Howdy,

Too late. All the stock crap went to the folks that bought my car this weekend.

Only have the Tokico Illuminas and 315/30-18 R6's left. Make an offer! Particular on the tires... These are good quality used tires, perfect for someone looking to not spend much to have some good track day tires.

Mark

Howdy,

Tokicos are gone. Only thing left is a good set of 315/30-18 R6's.

Mark