-Strano rear springs $100 o.b.o.

-New QA1 XMR12 x6 new right hand rod ends http://www.jegs.com/i/QA1/122/XMR12/10002/-1
-New FK JMXL12T x2 rod ends http://fkrodends.carshopinc.com/product_in.../112525/JMXL12T
-All 8 new rod ends for $180 SHIPPED

-Thunder Racing custom ground LS1 camshaft
Duration at .050" lift: Intake 224 Exhaust 228
Valve lift with 1.7 rockers: Intake .641" Exhaust .644"
Came as a spare with a car I bought, Excellant condition $200 o.b.o.

-New Autometer electric oil temp gauge with single pillar pod $55 o.b.o.

-I decided not to install the LS1/6 into my '96 as originaly planned. So I will be parting out the remaining "good" parts from this combo, I have to price the parts first, but there is a Mezier elec water pump, ported 78mm tb, ported MAF, all engine covers (some with new gaskets), PCM and harness, air lid, coil packs etc, etc. The engine had broken a piston for the record. The parts that are listed above are still for sale.

PM sent for the torque arm.

What timing. PM sent.

All PM's replied

Specs on the rod ends? How many?

I'll be going by the shop this weekend, but I believe they are 3/4" RH, and there are 4-6+. I will update you once I get there and confirm the measurments, they are still in the plastic packaging iirc correctly.

Rod ends:
4x QA1 (Kevlar) RH 3/4" x 3/4" sealed in bag
2x QA1 (Kevlar) RH 3/4" x 3/4" open bag, unused
2x FK LH 3/4" x 3/4" sealed, JMXL12T

I will take the track brackets. Shipping quote to 36619, Mobile AL. These are new not used correct.

Sorry no, the track brackets were used in an Auto-X car
I will get pics today of them, original post updated with part numbers

pm sent

whats the rate on the rear springs

I'm not 100% sure, they are a progressive spring and I believe Sam only offers 1 set for f-body's

Got the GC suspension bits. THANKS!!!

Glad to hear they made it all the way there ! Enjoy !

Do the brackets come with all original hardware?

PM sent for brackets

I'm sorry, this was in response to the seat brackets that were listed previously, the track brackets are new, with all hardware included. First dibs go to FASTFATBOY

Mike

listed items are still for sale, will be parting out the LS1/6 as well and adding parts to this post over the weekend.

How much for the throttle body shipped to 22407? Do you have the LS6 heads?

Is it just a standard ported stock piece?

Thanks,
Mike

Might be interested in the oil temp gauge and pillar pod, except I don't have any idea how/where to install it.

It mounts on the vertical pillar on the drivers side, betwween the dash and headliner, and is a 1 or 2 wire connection to a sending unit
Gauge http://www.summitracing.com/parts/ATM-3348/
Mounting pod http://www.summitracing.com/parts/ATM-10211/

Mike, you have PM

PM sent regarding Goodridge 4-channel braided line kit

all pm's replied to