I've quoted several of these rollbars at $1400 and not gotten a response, so that price must be higher than folks can justify for my features and quality. I do think there is a market for a high quality rollbar out there, so I've tooled up to be able to manufacture them substantially faster, which lowers my cost. Tube fitting is now done on a mill instead of by hand with grinders. Got one of these installed and shook down last week, now I gotta pay for it.

So, announcing a GP on Blaine Fab's 4pt street/track rollbar for the 4th gen hardtop and T-top cars. Pricing breakpoints for the GP are:

$850 if the GP gets 3 paid orders
$800 if the GP gets 5 or more paid orders

The new non-GP price on the rollbar will be $975 when this GP expires. I'll leave the GP open for 4 weeks. Orders will be filled on a first come-first served basis. Orders placed with a $500 deposit will go into the manufacturing queue right away, with delivery expected 4wks ARO. Balance due prior to shipping will be determined by the GP breakpoint level achieved, plus freight cost.

Truck freight is additional cost. PM me with ZIP code, commercial or residential address for a quote

Add CA sales tax for shipments to CA address.

Installation and powder coating are extra cost options for local customers.

Features:
TIG welded
DOM tubing 1.75" dia .120" wall
Main hoop full width, custom per order with or without sail panels
Main hoop full height, headliner can be trimmed and reinstalled. No impact on rearview mirror sightline
one piece main hoop diagonal
harness bar full width, custom height per order
rear backstays straight to rear shock mount doubler plates - rear seat backs will not be useable
Meets SCCA and NASA specs for cage construction, could be upraded to full CCR/GCR compliant 8pt cage
fitted high density padding included - black is standard, other colors optional
finish is bare, ready for paint or powder coating
complete installation instructions included - must be done by a competent welder.

Optional backstay diagonal + $90
Optional wall thickness .095" for autocross cars -$20

Here's a good example: Dans rollbar has the optional backstay diagonal
http://homepage.mac.com/dankeen/CamaroMay06/index.html
http://homepage.mac.com/dankeen/CamaroMay06/index2.html

And another example, also with the optional backstay diagonal:
http://www.blainefabrication.com/projects/2011_02_26/
Excuse the messy car - it's a burn car that I used for mockups and fitting


Disclaimer: Blaine Fab warrants only that dimensions and material meet NASA/SCCA 2011 technical requirements. Installation must be performed by a skilled fabricator and welding must be full 360deg, full penetration to AWS standards. The car with this rollbar installed must never be driven with a passenger in the rear seat. Be advised that even with the highest quality installation, a user may experience impact force high enough to cause injury or death. Buyer assumes all liability for injury or death.