I have to take a proper inventory, but I have all the #10 AN braided line that came out of the Camaro. Most has hose ends, some NPT to AN straights and angles, some bulkhead fittings and there's a piece or two that's just loose hose. One run came from the oil filter to the radiator and back, one came up from the oil filter and went over the bellhousing and to a bulkhead fitting on the passengers side, one went from the bulkhead fitting down the passengers side and behind the driver to the accusump and I may have others. We ran it through a parts washer and cleaned it all out. I also have a few assorted fittings still sealed to the cardboard cards they came on (some straights and maybe a 45 and a few loose fittings that never got installed.

If anyone is interested, let me know what you need and I'll get a list of what I have and some prices.

Here's the inventory:

All hose and ends are 10an

32" hose with a straight and a 180 swivel fitting
34" with 90 and 180 swivels (both)
41" with 90 and 90 swivels (both)
46" with 90 and 180 swivels (both)
79" with 45 and 90 swivels (both)
45" with a 45 swivel and no fitting
44" with no ends
8" with no ends
87" with no ends

2 brand new (still sealed in the pack) straight fittings
1 used straight fitting (good condition)
1 10an to 1/2" npt adapter fitting
1 bulkhead fitting with nut

That added up to 34.6 feet of assorted line and an assortment of fittings.

Racerdad is going to use a few bits of this to plumb his oil cooler (we're looking to see what hoses fit since some should be the same) and the rest it up for sale.

I'm thinking about $200 for the rest (or let me know what you need).

Anyone? Offers?

You still got any of this stuff? Inquiring minds want to know!

I still have all of this stuff (unless I add an oil cooler to the Vette, but I don't think I want to do that).

It's getting to be oil cooler season if anybody needs line or fittings.

I'll take two. One with a 90 on both ends and one and the 90/130 combo. there is still a pile of stuff left.....

Oil cooler lines anyone? Still cleaning out the garage...

I still have a pile of 10AN lines. All cleaned up and ready to go.

What do you have? I need to acquire parts to plumb my accusump. I figured I'd run a solid line up from the adapter, then turn it 90-deg to run across the back of the engine/firewall, but then need to turn again into the pass compartment to the back seat area.

Thanks.

I need to plumb an oil cooler, but I'm not sure exactly what I need.

The cooler is 1/2 NPT, but I don't have the oil filter adapter yet. I'll definitely need 90 degree fittings off the cooler though.

Let me know if you can help.

That's about how mine was run in my 3rd gen. Tell me the lengths you need and I'll see what I have (I likely have the stuff).

Unfortunately, I don't have the engine in the car, but I'll go take some quick measurements tonight to guestimate what I'll need. Thank you.

I'm sure I can help. Just need to sort out the lengths (approximate).




Keep me posted.

I'll do that. I got tied up trying to recover my wife's laptop last night, but we're waiting on software now, so I'll get out there this afternoon right after work.

Right now, I'll take what you have left from this pile of parts:

2 brand new (still sealed in the pack) straight fittings
1 used straight fitting (good condition)
1 10an to 1/2" npt adapter fitting
1 bulkhead fitting with nut

Thanks.

I'll try to get the box out tonight and verify what I have from that list.

Thanks!

Cool. Thanks. It looks like I may need as much as a length that's 36" long and another 80" long. So I guess if they are still available, I'll take these:

44" with no ends
87" with no ends

Although I may end up making most of those lengths up with my tubing, it can't hurt to have it handy when I get into the meat of the install. Thanks.

I have the tote in the garage. I'll dig it up tonight and we'll get it worked out.

Thanks!

Cool. Thanks.

Gene, I'm waaaaayyyy behind. Do you still need these hoses?

Yes. I still need to plumb the accusump, so let me know what you have.

Pretty much everything but the couple hoses Racerdad used. I'll pull your list from the earlier post.