Gotta make room in the shop for more stuff, these gotta go:

All are Eibach 2.5" ID coilover springs, pairs

1 pr Eibach 1000.250.0600 10" x 600# new $100 $90 $80

1pr Eibach 1200.250.0325 12" x 325# used $70 $60

1pr Eibach 1400.250.0175 14" x 175# used $70 $60

1pr Eibach 1400.250.0150 14" x 150# used $70 $40 These have some scrapes and rust - price reduced

plus shipping

Dropped prices, and I found some more springs:

Used Eibach 0800.250.0950 8" x 950# $70 SOLD



Used Eibach street rear springs, 13" free length $40

Spring cleaning time again, I still have all of these.

Spring has sprung, bouncing this back to the top. Still have all of these.

Let me consider on ^^^^

Alan,

Will the 600# springs work with ground control style front hardware? (I don't know exactly what set of sleeves and adjusters is coming with the new car yet).

Kevin - Yes, they will work with Ground Control, or Global West, or any other 2.5" ID setup, and they are the right length for the Fbody.

The 175# springs are rear pigtails, right? I've got a 750/250 set up and was thinking about getting a pair of softer springs for the rear just to have some adjustability if its too tail happy.

No, these are all 2.5" ID coilover springs.

You want these: http://daymotorsports.com/proddisp.php?ln=...D.+X+12+Inches+ with no upper perch

or these: http://daymotorsports.com/proddisp.php?ln=...D.+X+11+Inches+ and use the OEM rear upper perch and maybe some spacer to get the ride height.

I see that now, sorry. I guess the 175# is for a rear coil over set up.

Both sets of 14" x 2.5" springs are from my old race car - I fabbed up my own weight jacks, with the tops of the springs in buckets, with adjusting screws poking up thru the rear deck. Between moving the centerline of the springs inboard, a bit, and the smaller dia springs, I was able to move the bump stops inboard so 17x11 GS offset wheels without spacers would not touch anywhere under any combo of bump,roll or droop.

You still have the 600s?

Might be interested.

Any thoughts on those up front with the 1LE swaybar in a third gen?

I have some 300's for the rear on the way.

Current setup is 370F 200R. Seems it may be too soft, especially in the rear.

Yes! Yes I still have the 600 x 10's they are still brand new. $80 + $11 USPS Priority Mail

I don't know 3rd gen well enough to say if that would be a good combo.

Well crap, my front springs are 8" free length. Not gonna work. Sorry.

I keep bumping into these things

Spring is just around the corner, time to get some.

Spring has sprung again, time for more spring cleaning - spring into spring with some really, really springy springs. I mean, what else in this world do you get back back exactly what you put in? Buy these, put them on your shelf, makes the shelf look racy. My shelves are full.

All the springs in the opening post that are not marked sold, are still available. They will fit in a med or large USPS flat rate box, so $12 or $16 for 2day shipping in the lower 48.

Just in!

Black 300# x 11" pigtails. Good for a lowered roll center car. Seasoned. $70/pr + $16 USPS shipping

On a full weight car, these work well with the LT1 hard rubber upper spring perches - they add 1/2". The LS1 cars have soft rubber perches that don't work as well as the LT1 version. If you need the LT1 perches I'll throw in a pair with the springs, I have plenty.

I still have some space on my shelf! I'll need the LT1 perches too.

Check or ?

Thanks Larry - I sent you an email

Alan,

I am on Strano springs (550lb front) for now, but if I lower my rear roll center are any of these rear springs you have for sale a good match? Seemingly your selections are probably too stiff. What you think?

-Brent C

Alan- Do you have any rear spring shims for sale? I need to shim up both sides approx 3/4" to 7/8" on my LT1 car. I could use thinner shims and add them to what I already have, however, I would prefer a single thicker shim.

Ken Cemo

You'll want 250-350# in the rear, 11" pigtails with the LT1 perches. Larry got the only set that I had that would work for you. I do have several sets of LT1 rear upper perches left. $40/pair

Ken - I make the rear spring shims to order, in any thickness. They are attached to the top of the LT1 perches. If you already have the perches, I'll make a single spacer to your spec, with holes drilled and countersunk. You'll just need to drill 3 holes into the top of your perch, I'll supply self tapping screws.

They end up looking like this:

Time for the fall bump, and I found another pair of used springs - Eibach 0800.250.1200 - yes that's 1200# x 8" x 2.5" ID. $80/pair + $12 shipping via USPS Priority Mail.



I also still have the 14" long 150# and 175# springs, and the rear street springs from posts 1 and 2 of this thread.