More goodies for sale. I have a pair of Hypercoil 1810B0550 coil over springs (10" by 550 in lb) that are new in the box as well as lots of coleman coil over parts (also new in the box). I'm going to stick to standard "street parts" for the new 4th gen and that means I'm not putting coil overs on the front of it.

2 - Hypercoil 10" x 550 in lb springs (1810B0550) ($135/pr mail order pricing)
2 - upper aluminum spring "hats" ($15+ each)
2 - coil over sleeves (roughly $35/ea)
4 - Coleman SN-424 threaded adjusters ($15.59/ea)
1 - bag of clips (for the coil over sleeves to sit on) and "safety pins" ($10 total)

Based on mail order pricing (the best I could sort out), this stuff runs a bit over $300 new. This stuff is new and I'll offer a discount so it can find a good home.

$250 + freight OBO

$225 plus freight

$200 plus freight.

Offers?

$175 plus freight.

Do they worth with Koni yellows ?

I believe they should, but I can take a measurement from the sleeves and see what the inner diameter is. If you can measure the Koni's, that would tell us for sure. I'm not sure about the hats and all since I've never done a coil over conversion on one of these cars. I got the parts with the SS I purchased.

Still available.

WHAT INNER DIAMETER ARE THE COIL OVER SLEEVES?

2.045" ID and there is a step for the snap rings that is 2.143" and .614" deep.

$150 plus freight. Somebody needs this stuff and I'm starting to need the space back.

I'll keep the springs and sell the rest for $50.

Check ,does those (hats.sleeves,adjuster) will fit on 2002 camaro oem shocks (2.5" diam.)? if so, I want that.

Dusty,

Measure your shocks and see if they fit these dimensions:

The sleeve measures 2.045" ID and there is a step for the snap rings that is 2.143" and .614" deep.

If that matches your shocks, let me know and we'll work out the rest.

Ok...$125 with the springs (the springs cost more than that).

Anyone?

FYI, I measured the Koni Single adjustable yellows on my 95 Camaro.
The OD on my Koni shocks is 1.975

Kevin, I sent you a PM.

Replied.

10" x 550 in lb Hypercoil springs.

$75/pr plus freight.

550 in lb Hypercoil springs (new).

$65 plus freight

$50 plus freight

$45 plus freight.

Do you still have the kit?

Thanks
Jack

Just the springs. The rest is gone.

Jack,

I have the threaded tubes, adjusters and clips if your interested.
Not going to work for my project.

Charlie