Cleaning out the shop. All parts off the 4th gen CMC car. Pictures upon request. ALL PRICES DO NOT INCLUDE SHIPPING. If you’re interested in something, I’ll get an actual UPS quote, or, we’ll work something out. I run the NASA Midwest schedule, so within the “family and friends” network at the track, we can probably get parts close enough for you to pick up. Contact me direct at kos-at-smallbytes-dot-net or 608-thee three two-0130


Firesense AFFF system 4 liter bottle with mounting bracket, 6 nozzles, 5 T's, 3 straight fittings, 1 bulkhead fitting, 2 discharge handles, aprox 15 feet of hose. Bottle certification to 4/12/15. BOTTLE HAS BEEN DISCHARGED AND WILL NEED REFILLING. SOLD

Auburn Racers differential 542088 GM 10-bolt 28 spline 3 series. 2 track sessions on brand new D-REX rebuild SOLD

T-56 main shaft and stock 5th and 6th gear. This is from a 2.66 tranny. 37/29 teeth cluster, 58 tooth, 67 tooth. $350 Will separate. THIRD GEAR SOLD. STILL HAVE CLUSTER AND 6TH. MAKE OFFER

Koni DA dampers front and rear. Front’s 8242-1005-SP1 with GRound Control coilover kit. Rears 8242-1006-SP1, Both rebuilt by Koni and have 3 race weekends of use since rebuilt. $850 Will separate. FOUND OUT ONE OF THE FRONT SHOCKS IS BLOWN. WILL SELL AS REBUILDABLE CORES. MAKE OFFER. Will separate GC coilover kit.

Front Springs 2 ½” x 10” 675lb, $80/PR

Rear Springs 5 ½” pigtail all cut/bent to 10”. 300lb, 325lb, 350lb. $50/PR

B&M Shifter for T-56 SOLD

Blain Fab front LS brake ducts. Ducts only, no hardware SOLD

LT-1 used parts. All take-offs, or things I’ve purchased over the years for spares. Call me if you need anything LT-1, I have a ton of stuff. Heads $75 ea. Intake manifolds $45 ea. Water pumps $35 ea. Starters $20 ea

I will take the ducts! Sending PM now.

Don't be afraid to make offers.....

Thanks!
KO

interested in the DA front and rear with a set of springs. sending pm

Found one of the front Koni's was blown. Will separate Ground Control coilover kit. Make offer on the front shock bodies as rebuildable cores.

INTERESTED IN THE COIL OVER SETUP.... HOW MUCH?

PM sent.....

Kent,
What's the FIresense bottle capacity? 2.25L or 4.0 L? Is it mechanically or electrically actuated?

4 liter with two mechanical pull handles.

Pete, you going to make G-man? I could toss it in the trailer and you can have a look-see...

Yes, sounds good

payment sent for 2 pairs of front springs

Got it....package sent.

How much did you pay to have the koni's rebuilt? Trying to figure out how much to offer.

$638.19, not including freight. I think it was about $35 or so each way, so let's just round off the rebuild at $700. That is for both front and rear dampers. The fronts had three-ish weekends on them after the rebuild, so I'm pretty PO'ed that one of them puked just sitting on the bench. I finished the year on the rears, so they have a full season on the rebuild.