Just swapped an LS into my LT1 CMC car and starting to list off everything. I'll periodically updated this thread with more stuff as I get to it but do reach out if you need anything stock-ish for an LT1 as I have it.
All prices shipped to CONUS:
Two PSC deflowed pumps with permanent 6AN outlet conversions (you just need to get the Russell adapter fitting for the rack). One pump is brand new and sealed, the other ran on my car for a few events this year with no issues. Whole package for $275, or $100 for the used pump and $200 for the new one.
Another PSC deflowed pump, no outlet conversion and inlet is converted to 10AN; $100
Two sets of MC/Slave cylinder+line combos $75 each
Steering rack rebuilt by Turn One back in 2013, still seems to work good but I nicked a boot with engine hoist, so it'll need a new boot. $125
Steering coupler/shaft with Unbalanced Engineering rag joint eliminator $40
Techrods LT1 swap harness; This is a harness made from scratch that only requires two wires (ignition and fuel pump) to run an LT1. Worked great for four seasons New is $374, asking $175. This is a 96+ OBD2 harness; I ran it with an OBD2 computer.
This is still only a fraction of what I have left to box up and list or otherwise take off the motor; if you're needing to buy something for your LT1, contact me first, I may have it. Throw me an offer!
Full Version: Going out of the LT1 Business Sale
Paypal sent for pumps and rag joint eliminator.
QUOTE (Pranav @ Nov 17 2016, 04:47 PM) 
Just swapped an LS into my LT1 CMC car and starting to list off everything. I'll periodically updated this thread with more stuff as I get to it but do reach out if you need anything stock-ish for an LT1 as I have it.
All prices shipped to CONUS:
Two PSC deflowed pumps with permanent 6AN outlet conversions (you just need to get the Russell adapter fitting for the rack). One pump is brand new and sealed, the other ran on my car for a few events this year with no issues. Whole package for $275, or $100 for the used pump and $200 for the new one.
Another PSC deflowed pump, no outlet conversion and inlet is converted to 10AN; $100
Two sets of MC/Slave cylinder+line combos $75 each
Steering rack rebuilt by Turn One back in 2013, still seems to work good but I nicked a boot with engine hoist, so it'll need a new boot. $125
Steering coupler/shaft with Unbalanced Engineering rag joint eliminator $40
Techrods LT1 swap harness; This is a harness made from scratch that only requires two wires (ignition and fuel pump) to run an LT1. Worked great for four seasons New is $374, asking $175. This is a 96+ OBD2 harness; I ran it with an OBD2 computer.
This is still only a fraction of what I have left to box up and list or otherwise take off the motor; if you're needing to buy something for your LT1, contact me first, I may have it. Throw me an offer!
All prices shipped to CONUS:
Two PSC deflowed pumps with permanent 6AN outlet conversions (you just need to get the Russell adapter fitting for the rack). One pump is brand new and sealed, the other ran on my car for a few events this year with no issues. Whole package for $275, or $100 for the used pump and $200 for the new one.
Another PSC deflowed pump, no outlet conversion and inlet is converted to 10AN; $100
Two sets of MC/Slave cylinder+line combos $75 each
Steering rack rebuilt by Turn One back in 2013, still seems to work good but I nicked a boot with engine hoist, so it'll need a new boot. $125
Steering coupler/shaft with Unbalanced Engineering rag joint eliminator $40
Techrods LT1 swap harness; This is a harness made from scratch that only requires two wires (ignition and fuel pump) to run an LT1. Worked great for four seasons New is $374, asking $175. This is a 96+ OBD2 harness; I ran it with an OBD2 computer.
This is still only a fraction of what I have left to box up and list or otherwise take off the motor; if you're needing to buy something for your LT1, contact me first, I may have it. Throw me an offer!
Pranav,
Do you have any of the PS pumps left? I would be interested in getting one if you do.
What about the LT1 motor? Do you still have it? I think I lost a main bearing in mine yesterday at the track and I'm looking for a spare top rebuild. Let me know, thanks.
-Kelly
Kelly, yes pumps are sold; sending you a PM about motor.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.