Due to quantity of items, pictures available upon request. All prices exclude shipping, insurance, PayPal fees, etc. If you buy multiple items of different types we can discuss a bulk discount. Reasonable counteroffers considered. I might be interested in some trades, I would need to come up with a list of what I'd be interested in.

Edit: some prices reduced again. Some prices advertised lower here than at LS1Tech, including the Koni DA's.

For sale:

Brakes/suspension:
* ACDelco 17D750MH rear brake pad kit, installed for maybe 1-2 weeks removed because I wanted more rear brake force, 0.393"-0.417" pad thickness remaining, kit $28.89 new from RockAuto, free with another purchase
* AFCO 8"x5"x300lb conventional spring set (PN AFC25300-3), flat ground on both ends, (pair, yellow), @67oz, $50
* Eibach 9.5"x5"x300lb conventional spring set (PN 0950.500.0300), flat ground on only one end (pair, red), @68oz, $50
* Hypercoil 11"x5"x300lb conventional spring set (PN 18SN-300) flat ground on both ends, (pair, blue), @85oz, $50
* AFCO 10"x2.5"x650lb coil over spring set flat ground on both ends, (pair, yellow), @94oz, $50
* Koni Double-adjustable front coil over shock assembly kit (PN 8242-1005SP1, inspected by Koni in 2014, receipt provided) with Hypercoil 650# (PN 10B0650) springs, includes custom BlaineFab tool ($40 value) to remove top hat, Koni rebound adjuster tool and OEM upper shock mount (free, if desired) (one pair, est @8.5lbs), $650
* Koni Double-adjustable front shock (PN 8242 1005SP1) (spare, inspected by Koni in 2014, receipt provided, needs top hat installed (included)), (8.2lbs, 1 available), $275
* Koni Double-adjustable rear shock set (PN 8242-1006SP1) (inspected by Koni in 2014, receipt provided), (pair, @5.2lbs), $650
* Bilstein rear HD shock set (F4-B46-1121-H0), low miles, been sitting in storage, @4lbs, $80 in original boxes
* AllStar PN ALL56119 threaded weight jacker kit, sits on OEM lower spring perch, used to adjust ride height of 5" conventional springs, $25 for pair, or free with purchase of one pair of 5" springs
* Unbalanced Engineering rear steel lower control arm kit, ~14 years of use, with steel bushings, jam nuts & 3yr old FK heim joints (two need replaced, not included), replaced arms to save weight, $100

[Bare bar only, no accessories included]
* Suspension Techniques 35mm solid front antisway bar, 26lbs, $100
* Addco 32mm solid front antisway bar, 21.5lbs, $50
* GM 30mm hollow front antisway bar, 9.5lbs, $50
* Addco 25mm solid rear antisway bar, 12.5lbs, $50
* Unknown 24mm solid rear antisway bar, 9.5lbs, $50
* GM 19mm hollow rear antisway bar, 6.65lbs, $50

Wheels:
* Enkei Win3, 17"x9.5", @24lbs, bought in 1996 and used as daily driver wheels until 2010, set of 4 plus one spare (spare has gouged metal lip), $250 for normal 4, damaged spare is free if you buy the other 4 at my price.
* AFS ZR1 polished aluminum replicas, 17"x11", 50mm offset, 4 available, @28lbs, approximately 15 years old, originally only used as autocross wheels, but became daily driver wheels in 2010, slight brake dust accumulation and slightly cloudy finish, $450

Engine:
* FAST Fuel injector harnesses, EV1 <>EV6 injector adapters, PN 170604-8, used, $25
* Scoggin Dickey SD90BRKT throttle cable bracket, $20
* Scoggin Dickey Billet throttle cable bracket, w/ 2 long bolts, $20
* BlueMaxx 90mm cable-driven billet throttle body, purchased through Vengeance Racing maybe around 2008? No bolts or sensors, $100
* OEM 1998 F-body LS1 screened MAF & accordion hose, $20
* Crane Cams 3/8" pushrods, installed as a set of used 7.400's from Vinci Performance, after they came back out it was determined that they were not all truly 7.400's. (2) ~7.45, (12) ~7.410 & (2) ~7.360; $100 for all
* March 208 billet alternator pulley, never installed, $30

Misc:
* Valentine 1 radar detector w/ suction cups (need replaced) and power wiring, bought used in early 1990's, $50
* Tesla Original GTech accelerometer, worked when removed from vehicle years ago, free with another purchase
* B&B Electronics AutoTap w/ cables, no software, worked the last time it was used, free with another purchase
* LS1-Edit for 97-98 F-bodies, with cables, no software, worked the last time it was used, free with another purchase

bump

Bump, some prices further reduced.

PM’d ya Jim

I've been hoarding boxes to ship this stuff, and the boxes are getting in the way. If I throw out the boxes, I'll have to buy packaging to ship them in the future. Prices lowered again in the hope I can move some of the larger items before discarding the boxes.

PM sent

Does the throttle cable bracket work with the 102mm units?

I do not know since I don't own a 102mm TB to verify.

https://www.summitracing.com/parts/nwp-sd90brkt
https://sdparts.com/i-22714833-sdpc-sd90brk...le-bracket.html

I can't find an advertisement for the billet bracket at this time.

Tangent, I'd really like to get these Koni DA's unloaded for a reasonable price. Any idea on fair market value? They were bought new in roughly '97, inspected and/or rebuilt in 2014.