1 pair of caliper brackets from Baer's "Track" kit for 4th-gen F-Body. These brackets
are from the kit that uses the C4 2 piston PBR Corvette/Grand Sport caliper and 13" x
1.1" Vette rotors. These are the original design and will need to be modified for use
with the larger ABS connector found on later hubs. I have only 6 of the 8 bolts that
secure the bracket to the hub, so you'll need some additional hardware.
$50 + shipping OBO.

Edit: just to clarify, these cannot be used with the C5 calipers and rotors.



Joe Creecy - 94 & 96 Formulas

Sold!

Mike

If Mike doesn't take them, I definitely will. Let me know.

Well.. I decided against them after some research... these are not bad brackets by any means and will be a HUGE upgrade to camaro brakes, but its not what I thought they were.. These brackets will fit C4 brakes, not the C5's which is what I need.

Oh well.. I guess I will have to finish my custom home made brackets now (don't worry, Im using T-6061 and a proper machine shop!)

Mike

Dang, I was all set to buy these, and then the wife tells me I can't buy any brake parts until after Christmas. Guess somebody else will have to get the deal on these.

Sold!