Koni DA's for the front of a 4th gen. Bought on 12-13-04, installed right after the new year. NO track time, maybe 300 miles street time. Hats were modded for CG Coilover setup. Just cut the bottom of the hat so you can get a open end wrench on the nut. Was cut with cutoff wheel, taking care to cool the body off with cold water every so often as to not ruin the seals.

$450 plus shipping and trade for stock front shocks.

GC Coilover kit, with 500/150 springs

350 plus shipping plus stock springs

Front 700lb springs for GC Kit, came with kit, never used them.

75 plus shipping

Strano Hollow 35mm front bar. Bought on 1-3-05. Installed for 1 month.

150 plus shipping

Sold car and going back with my drag car. No time for Auto-x as I work weekend during the days and no road track anywhere near me. Parts are ON the car right now, as soon as I recieve stock parts to replace them I can pull them off and ship them. I have all reciepts from purchases.

Thanks for looking.
Kyle

Also Bob Bishop C5 brackets. 2nd of the last batch.

275 plus shipping?

I might be interested in the front shocks. Could you send pics to trackbird (at) columbus.rr.com (on the car is fine, I just want to see the "hat" area)

And, I do have stock shocks.

Will do, Ill just have to track the car down(she lives accross the street, just gotta catch her home one day) and snap some pix. Ill get em to you by the weekend.

Kyle

Cool, thanks.

I'll take the front bar

Put me in line for the front bar if the other sale does not go through !

I am also interested in the front bar.

ChevyWeatherman, we should buy that GC kit, you could have the fronts (that is exactly what I have now)and I would take the backs. Elkyracer, I assume the rears are GC's as well ? Are the springs set up for stock height at the minimum setting, or lowered ?

Yup rears are GC, with 200lb rear springs adjusted all the way down with no rubber on top it sat LOW, compareable to a pro kit?(lowest of Eibach's springs). The 150s are BRAND NEW in the box never installed. Never got around to it.

Kyle

I'm interested in the front ground control kit if you want to split it up.

I would be interested in the rear GC's, pming jackman and elkyracer to close this deal !

Just a reminder to you all.... Those parts are all readily available new. Hell, I've got 25 front bars right outside my office as I type this.

I know it's the deal you are looking for (and good luck to Kyle on selling his stuff, sorry to hear you won't be turning with us...).

Just saying that if you "lose out" on Kyle's parts, I have plenty more.

Tim, replied to your email.

Elkyracer, will you send the Ground Control bumpstop with the front weight jack?

Sam, sent you a PM.

I might want the 700 springs and the rear 200's (if you sell the rear kit with the 150's).

Someone a while back had spoken for the rear 200lb springs. Now if I could just remember. Ill let you know if he doesnt want them anymore. And your pix are coming of everything, Ive just got to get some time to meet up with her on a not so rainy day!

Kyle

So new Strano bars are now 150?

Probably not - they are still listed at $199 on the website. However, three people expressed interest for one used bar, and that is obviously not going to work

The hollow 35s are a custom part for Strano that are made to order by Addco in small runs. They are not a standard production item. Sometimes you can get them, sometimes you can't.

One lucky person can buy a used one for $150. Anyone else wanting one CAN get one right now, but it will be new.

sent pm on konis. need to see them please