sgarnett
Aug 22 2006, 11:20 PM
I'm selling a set of 4 old-style 5 spoke CCW 3-piece 16x10s now without tires.
The wheels are ugly, but in a purposeful, built-for-racing kind of way that I like, and they have some nicks and scrapes [and gouges and tool marks from installing/removing stiff race tires].
Now only $300 + shipping for rims only, no tires. Price slashed
sold
Doug Phillips
Aug 23 2006, 02:04 AM
QUOTE (sgarnett @ Aug 22 2006, 07:20 PM)

I'm selling a set of 4 old-style 5 spoke CCW 3-piece 16x10s with 265/45-16 V710s. The Hoosier 275/45-16 is also a good match for this rim.
The tires have been used for most of two seasons, but I've missed a lot of events and frequently codrove another car. Most of the sites I run at are also easy on tires. They are certainly past their prime, but there's a lot of tread left and they still get sticky.
The wheels are ugly, but in a purposeful, built-for-racing kind of way that I like, and they have some nicks and scrapes.
This would make a good setup for making the jump to race tires for local autocross, an Evolution school, or HPDE.
$600 + shipping
I'm out of hosting space at the moment, but I can email pictures.
Pictures, rim weight and offset to doughphillips@cs.com please.
sgarnett
Aug 23 2006, 01:09 PM
Sunday's event was on very grippy asphalt that is weathered but sees very little traffic and isn't worn smooth. I won by over a second on a short course. I hadn't looked closely at the tires for several weeks, but I'm now revising my description from "lots of tread left" to "still some usable" tread left. See pcis for details.
I didn't have a good scale when the rims were bare. I measured 43 3/8 lbs on a medical scale with the current tires prior to the last event.
The rims have integral 1/4" spacers bolted to the back of the hubs with two flat head (ie tapered seat) bolts threaded into blind holes in the hubs. They came that way when I got them, and that's the only way I've ever tried to use or fit them. The net offset with spacer is about 42mm. No body, spindle, or bumpstop modifications were necessary. I had already beat my rear inner fenders for 275/40-17 on SS rims, so I don't know if that would have been needed with these rims.
Doug, my internet connection gets pretty flaky after dawn. I probably won't be able to get pictures through until tonight or early tomorrow morning. I'll give it a shot now, but if you don't here from me until later, I didn't forget ....
robz71lm7
Aug 23 2006, 01:14 PM
I've seen the wheels personally-even ran them on my car one day. They are as described and would make a nice set of race wheels.
sgarnett
Aug 23 2006, 01:32 PM
Thanks, Rob.
I forgot to mention that I flipped the tires this spring, and rotate them for every event. All four tires look pretty much the same, so I only took details shots of the tread and shoulders of one representative tire.
My internet connection is barely usable for text at the moment. If the connection isn't better this evening, I know of a local bar with a patio and a wireless hotspot
sgarnett
Aug 24 2006, 03:07 AM
QUOTE (sgarnett @ Aug 23 2006, 09:32 AM)

My internet connection is barely usable for text at the moment. If the connection isn't better this evening, I know of a local bar with a patio and a wireless hotspot

Pics have been sent from said patio. No sacrifice is too great for you guys! Anybody else need pics? I'll be happy to come back tomorrow
CrashTestDummy
Aug 24 2006, 03:32 PM
Do they look like the ones here:
http://conecrazy.org/ipw-web/gallery/album17/404_0495_CRWWhat is the backspace on them?
sgarnett
Aug 24 2006, 09:41 PM
QUOTE (CrashTestDummy @ Aug 24 2006, 11:32 AM)

Do they look like the ones here:
http://conecrazy.org/ipw-web/gallery/album17/404_0495_CRWWhat is the backspace on them?
It's hard to say with the wheels spinning. They MIGHT be the same .... I have the pics saved in my outgoing email on the server, so i can think I can readily forward them now if you want to send me an address.
The backspace with the integral spacer is 7 1/8".
robz71lm7
Aug 25 2006, 12:41 AM
sgarnett
Aug 25 2006, 01:17 AM
Thanks, Rob!
Joe Silva
Aug 25 2006, 02:23 AM
I used to have a set of those; in fact, are you the person i sold them to?
sgarnett
Aug 25 2006, 09:11 AM
QUOTE (Joe Silva @ Aug 24 2006, 10:23 PM)

I used to have a set of those; in fact, are you the person i sold them to?
Yes, I think so
bills
Aug 27 2006, 07:49 PM
can you send me pics and do they fit over LS1 brakes?
Bill
sgarnett
Aug 28 2006, 12:17 AM
Post 9 above has links to the full size pics. I can email them to you also if you send me your address.
I've always run the wheels with the integral spacers, but I just [test-fitted] one without the spacer on the front and it fits over my stock 2001 Z28 brakes.
They will not fit over the C5 brake template.
CrashTestDummy
Aug 28 2006, 03:10 PM
The ones we have are more 'star' like. The spokes are a lot thinner, at least while looking it straight on the side. The spokes may be a little thicker, though, at about 9/16-3/4".
sgarnett
Sep 3 2006, 10:08 PM
The rims are now for sale without the tires. New price in first post.
sgarnett
Oct 21 2006, 12:57 PM
BTW, without tires the rims weigh 19 3/8 pounds on a medical balance beam scale.
sgarnett
Nov 18 2006, 02:23 PM
It's time to raise some holiday money. See above.
driver91
Nov 23 2006, 05:55 PM
I would like to purchase these wheels for the $300.00 price. Where in Kentucky are you. I am in Nashville, Tn. Please e-mail or call 615 542-0707 Thanks
sgarnett
Nov 24 2006, 04:29 AM
I'm between Lexington and Versailles. Shipping would be around $46 to a residence in downtown Nashville, or it will be in the ballpark of 200 miles one way (through Bowling Green, Elizabethtown, and Bardstown to Versailles).
I'll call you Friday. Who should I ask for?
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.