82 92 CAMARO FIREBIRD 1LE 36 MM FRONT SWAY BAR


edit - I found another one and changed the link

I never kept up with 1LE stuff, but why wouldn't they have got the 36mm bar like the WS6?

3rd gen 1LE bar was 36. Either it's not a 1LE, or it's not 34mm.

I'm not familiar with the 3rd gens. I just sounded like it was a good deal and someone here should get it. He must have listed 1LE just to get the hits off of searches being done (which is how I got it)

ahhh there is "the big one"

Not to hijack the thread, but I also have a set of 34 mm / 24 mm sway bars laying around here if anyone needs some

I thought the IROC bars were as big as it got?

Learn something new every day.

Here is some 3rd gen Sway bar info:


FYI, RPO codes are as follows from the decoder:

F41 : SUSPENSION SYSTEM, FRT, RR, FIRM RIDE, HANDLING
FE1 : SUSPENSION SYSTEM, S0FT RIDE
FE2 : SUSPENSION SYSTEM, RIDE HANDLING
FE3 : SUSPENSION SYSTEM, SPORT
Unable to locate code ZK3 in our database!
Z28 : MERCHANDISED PKG, SPECIAL PERFORMANCE

ZK3 is the export model so if you have one, you know who you are. Part numbers follow the descriptions.


91 F41 FRONT (34 MM) 14094339
91 F41 REAR (21 MM) 10021221
(REAR POSSIBLY FE2 ALSO)

91 FE2 FRONT (36 MM) 14094344
91 FE2 REAR (24 MM) 10035033


90 (NO CODE GIVEN) FRONT (36 MM) 14094344
90 (NO CODE GIVEN) FRONT (34 MM) 14094339
90-91 FE1 FRONT (30 MM) 14047916
90 (NO CODE GIVEN) REAR (24 MM) 10035033

89 FE2 FRONT (36 MM) 14094344
89-91 FE1 REAR (18 MM) 10021220

87-89 FE2,F41 FRONT (34 MM) 14094339
88-90 FE2,F41 REAR (21 MM) 10021221

87-89 EXCEPT FE2,F41 FRONT (30 MM) 14047916
87-88 EXCEPT FE2,F41 REAR (18 MM) 10021220

86 (NO CODE GIVEN) FRONT (27 MM) 14019268
86-87 EXCEPT ZK3/Z28 FRONT (30 MM) 14047916
86 ZK3/Z28 FRONT (34 MM) 14094339
86 EXCEPT ZK3/Z28 REAR (18 MM) 10021220

85 FE2 FRONT (34 MM) 14073013
85-87 FE2 REAR (24 MM) 10035033
85-86 ZK3 REAR (21 MM) 10021221
85-86 Z28 (EXCEPT FE2) REAR (21 MM) 10021221

84-85 ZK3/Z28 FRONT (32 MM) 14047917
84-85 EXCEPT F41, ZK3/Z28 FRONT (27 MM) 14019268

82-83 (EXCEPT Z28,F41) FRONT (27 MM) 14019268
82-83 Z28 FRONT (32 MM) 14047917
82-85 F41 FRONT (30 MM) 14047916
82-84 Z28 REAR (21 MM) 10021221
82-85 F41 REAR (18 MM) 10021220

the 1LE bar is the 36mm hollow bar correct? my 88 iroc had a 36mm hollow up front and 24mm solid rear bar. It was a stripper car though... That info came from TGO right? they don't have it entirely correct, iroc-zone did have all the info but i havent been over there in a long time.

I'm still running my original springs and 32mm front anti-roll bar. I don't think the antiroll bar diameter is the whole equation to handling: I think this table ought to list the spring rates of the F41, Z28, WS6, FE1, FE2, and FE3 for each model year. I'm pretty sure the spring rates changed from year to year. Thus, a 32mm swaybar on a 1984 WS6 with a relatively high spring rate, might be comparable in performance to a 1989 WS6 with softer springs and larger diameter swaybars. At least, that's my hypothesis.

Otherwise, the table doesn't tell the whole truth into the performance capability of each year's suspension configuration.

I'm running a 36mm front bar from a 92 WS6....I just tell people it's a 1LE bar; sounds cooler than FE2 and not as well known as WS6. Same bars as far as I know, and it was a noticable improvement over my stock 34mm F41 bar. And, yes, the 36mm is hollow (at least within my experience).