Well. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/banghead.gif) Motor is blown. It happened 3 weeks ago. Buttonwillow raceway on the first lap of the first competition session of the weekend. I was hoping to pull the engine out the last 3 weekends to find out exactly what went sour, but did not get around to it yet. So here is what I know so far:
The engine got a bit louder, sounded like the Y-pipe was falling off (so I thought at the time.) Than 15 seconds later, POPP, whole car filled with smoke. Engine stumbled for a second and than died. (Never turned over ever since.) I coasted thru the next 2 corners, (I was carrying speed and just hit a downhill,) staying way off line, and pulled off behind the flag stand on the infield. Once I got towed into the pits, I found out the damage. 2" hole on the side of the block. Apparently a rod, or part of the crank was trying to exit through there. Unfortunately it is almost impossible to see the damage since it is on the passenger side, right were the dip stick tube connects.
I will definitely need a short block. I am undecided on what direction to go. Back to stock, (run CMC2 in the future), rebuild current setup with the ridiculous cam I got (run TTB or PTB) or build a stroker (run AI). For CMC2, AI, I also got to swap transmissions. For PTB, AIX I can keep what I got. But AIX will need a serious engine and plenty of $$$, just to be in the same ballpark as Rocco. (one can always dream)
Anyway, due to lack of funds, I won't be running any time soon.
As for the Regional Championships, I losed 2nd place. Big Thank you to Artur who let me borrow his girlfriend's 3rd gen. I went for a "Sunday" drive for 3 laps to get last place points on Sunday. With that I locked in 3rd place for the season.
Also, thank you to John for the moral support his Coronas gave me Saturday. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/drink.gif)

This post has been edited by roadracetransam: May 27 2008, 04:23 PM